MIL-V-1189D, MILITARY SPECIFICATION VALVE, GATE, BRONZE (15 DEC 1987)., This specification describes gate valves for use in water, oil, gas, or steam services on shipboard

MIL-V-12003F (NOTICE 1), MILITARY SPECIFICATION, VALVES, PLUG, CAST-IRON OR STEEL, MANUALLY OPERATED (04 JUN 1996)., MIL-V-12003F, including Amendment 1, dated 27 November 1984, is hereby canceled without replacement.

MIL-V-12003F (NOTICE 1), MILITARY SPECIFICATION, VALVES, PLUG, CAST-IRON OR STEEL, MANUALLY OPERATED (4 JUN 1996)., MIL-V-12003F, including Amendment 1, dated 27 November 1984, is hereby canceled without replacement.

MIL-V-12276D (MR) (NOTICE 2), DETAIL SPECIFICATION, VARNISH, PHENOLIC, BAKING (21 SEP 2006)., MIL-V-12276D(MR), dated 4 January 1971, including Amendment 1, dated 1 August 1973, is hereby reinstated and may be used for acquisition.

MIL-V-16399A (NOTICE 2), DETAIL SPECIFICATION, VARNISH, MOISTURE PROOF (31 MAY 2006)., MIL-V-16399A (0S), dated 16 September 1971, is hereby reinstated and may be used for acquisition.

MIL-V-16399A(OS), MILITARY SPECIFICATION, VARNISH, MOISTURE PROOF (16 SEP 1971)., This specification covers a moisture-proof varnish having a tung oil and phenolic resin base.

MIL-V-16733D (NOTICE 1), MILITARY SPECIFICATION, VALVES, PRESSURE REGULATING, STEAM (10 JUN 1996)., MIL-V-16733D, dated 3 January 1989, is hereby canceled. Future acquisition of this material should refer to Commercial Item Description (CID) A-A-50558.

MIL-V-173C (AMENDMENT 2), MILITARY SPECIFICATION VARNISH, MOISTURE AND FUNGUS RESISTANT (FOR TREATMENT OF COMMUNICATIONS, ELECTRONIC, AND ASSOCIATED EQUIPMENT) (18 NOV 1975) [USERS MAY CONSULT ASTM-D3955 AND ASTM-D295 FOR POSSIBLE REPLACEMENTS].

MIL-V-173C (NOTICE 3), MILITARY SPECIFICATION VARNISH, MOISTURE AND FUNGUS RESISTANT (FOR TREATMENT OF COMMUNICATIONS, ELECTRONIC, AND ASSOCIATED EQUIPMENT) (5 APR 1999) [USERS MAY CONSULT ASTM-D3955 AND ASTM-D295 FOR POSSIBLE REPLACEMENTS]., MIL-V-173C, dated 5 November 1969, is hereby canceled. Users may consult ASTM D 3955 and ASTM D 295-58 as possible replacements. Users are cautioned to evaluate these documents for their particular application before citing them as a replacement document.

MIL-V-173C, MILITARY SPECIFICATION VARNISH, MOISTURE AND FUNGUS RESISTANT (FOR TREATMENT OF COMMUNICATIONS, ELECTRONIC, AND ASSOCIATED EQUIPMENT) (5 NOV 1969) [USERS MAY CONSULT ASTM-D3955 AND ASTM-D295 FOR POSSIBLE REPLACEMENTS]., This specification covers one type of moisture-and-fungus-resistant varnish consisting of a para-phenol=formaldehyde resin in combination with tung oil and suitable solvents which has been made fungistatic by the addition of 7.0 +/- 1.0 percent salicylanilide or one percent copper 8-quinolinolate, for the treatment of assemblies communications, electronic, and associated electrical equipement.

MIL-V-17501F (SH) (AMENDMENT 2), MILITARY SPECIFICATION, VALVES, CONTROL TYPE, MAGAZINE, AND HANGAR DECK SPRINKLER (9 DEC 1991)., This amendment forms a part of MIL-V-17501F(SH), dated 29 October 1990, and is approved for use by the Naval Sea Systems Command, Department of the Navy and is available for use by all Departments and Agencies of the Department of Defense.

MIL-V-17501F (SH), MILITARY SPECIFICATION, VALVES, CONTROL TYPE, MAGAZINE, AND HANGAR DECK SPRINKLER (29 OCT 1990)., This specification covers magazine and hangar deck sprinkler control type valves for shipboard service.

MIL-V-18436F, MILITARY SPECIFICATION VALVES, CHECK: BRONZE, CAST-IRON, AND STEEL BODY (6 NOV 1987)., This specification covers bronze, cast-iron, and steel body check valves with regrinding, renewable, or regrinding-renewable disks and seats.

MIL-V-18436F, MILITARY SPECIFICATION, VALVES, CHECK: BRONZE, CAST-IRON, AND STEEL BODY (6 NOV 1987)., This specification covers bronze, cast-iron, and steel body check valves with regrinding, renewable, or regrinding-renewable disks and seats.

MIL-V-18499E (NOTICE 2), MILITARY SPECIFICATION, VALVES, AIR VENTING, STEAM (12 JUN 1997)., Military Specification MIL-V-18499E, dated 4 October 1985, is hereby canceled. Future acquisition of this material should refer to Federal Specification F-V-2906.

MIL-V-18634B (NOTICE 2), MILITARY SPECIFICATION, VALVES; SAFETY, RELIEF, AND SAFETY-RELIEF (30 JUN 1998)., MIL-V-18634B, dated 3 April 1981, is hereby canceled. The preparing activity for this document has determined that the documents shown below are suitable replacements for the given classes. Users are cautioned to evaluate these documents for their particular application before citing them as a replacement document.

MIL-V-20064E, MILITARY SPECIFICATION, VALVE, NONFERROUS, FOR USE WITH HALOGENATED REFRIGERANTS (1 FEB 1972)., This specification covers manually operated valves for use with halogenated refrigerants.

MIL-V-2042E, MILITARY SPECIFICATION, VALVES, REDUCING, WATER SERVICE FOR NAVAL SHIPBOARD USE (6 JUN 1990) [S/S BY ASTM-F1370]., This specification covers self-contained globe, pressure reducing valves for use in water systems aboard Naval ships and in marine environments. These valves are limited to discharge pressure setting os 200 pounds per square inch (lb/in2) and below. Guidance in the selection and installation of these valves is contained in MIL-HDBK-227.

MIL-V-21064A, MILITARY SPECIFICATION, VARNISH, FINISHING, BAKING FOR ROLLER COAT APPLICATION (31 JUL 1974)., This specification covers two classes of finishing varnish for roller coat application on sheet metal which has been sized and color coated. This specification meets Air Pollution Regulations (Rule 66).

MIL-V-24509A, MILITARY SPECIFICATION VALVES, FLANGED, BALL AND PLUG FOR SEWAGE AND SEA WATER SERVICE (24 DEC 1992)., This specification covers flanged ball and plug valves for sewage and seawater service, under pressure or vacuum. Sewage contains seawater with varying amounts of detergents, caustic, acids, human wastes, sediments, oils, greases, solvents, and other chemical agents used on board ship.

MIL-V-24624 (AMENDMENT 1), MILITARY SPECIFICATION, VALVE, BUTTERFLY, WAFER & LUG STYLE, SHIPBOARD SERVICE (13 FEB 1984).

MIL-V-24624, MILITARY SPECIFICATION, VALVE, BUTTERFLY, WAFER & LUG STYLE, SHIPBOARD SERVICE (3 NOV 1983)., This specification describes wafer and lug style butterfly valves for shipboard service.

MIL-V-24694, MILITARY SPECIFICATION, VALVE, HYDRAULIC RELIEF, 1.5 - 35 BARS (22 -500 POUNDS PER SQUARE INCH) CARTRIDGE TYPE, GENERAL SPECIFICATION (METRIC)(28 OCT 1987)., This specification covers the requirements for cartridge-type relief valves for use in hydraulic systems with a maximum operating pressure of 35 bars (500 pounds per square inch (lb/in2)).

MIL-V-3E, MILITARY SPECIFICATION VALVES, FITTINGS, AND FLANGES (EXCEPT FOR SYSTEMS INDICATED HEREIN); PACKAGING OF (1 NOV 1994)., This specification covers the requirements for the packaging (preservation, packing, and marking) of hardware valves such as globe valves, angle valves, check valves, cross valves, cylinder valves, gate valves, relief valves, and associated fittings and flanges for shipment and storage. This document does not provide packaging requirements for valves, fittings, and flanges intended for use in gas generating, fluid, and pneumatic systems with cleanliness and preservation requirement standards exceeding those specified herein.

MIL-V-7899C, MILITARY SPECIFICATION VALVE, CHECK, AIRCRAFT FUEL SYSTEM (30 APR 1979)., This specification covers low-pressure check valves suitable for use with hydrocarbon fuels, fuel vapors, and air.

MIL-V-868, MILITARY SPECIFICATION VALVES, HYDRAULIC DIRECTIONAL CONTROL, GENERAL SPECIFICATION FOR (21 JUL 1989)., This specification covers the requirements for directional control valves for use in hydraulic systems. The valves are designed for standard or quiet operation utilize quill-type or face seal mounting configurations