MIL-M-008910A (AS) (AMENDMENT 2), MANUALS, TECHNICAL, ILLUSTRATED PARTS BREAKDOWN, PREPARATION OF (1 APR 1972).

MIL-M-008910A (AS), MANUALS, TECHNICAL, ILLUSTRATED PARTS BREAKDOWN, PREPARATION OF (7 FEB 1968) (USED IN LIEU OF MIL-M-8910)., This specification covers the requirements for the preparation of Illustrated Parts Breakdown technical manuals.

MIL-M-13508C, MILITARY SPECIFICATION MIRROR, FRONT SURFACED ALUMINIZED: FOR OPTICAL ELEMENTS (19 MAR 1973)., This specification covers a mirror coating consisting of a deposited aluminum reflective film overlaid with a transparent dielectric protective film applied on the front surface of optical elements.

MIL-M-15071H (NOTICE 1), MILITARY SPECIFICATION MANUALS, TECHNICAL: EQUIPMENTS AND SYSTEMS CONTENT REQUIREMENTS FOR (6 SEP 1994) (S/S BY MIL-M-24784, MIL-M-24784/1, MIL-M-24784/2, MIL-M-24784/4, MIL-M-24784/12, MIL-M-24784/13, MIL-M-24784/14, MIL-M-24784/15, MIL-M-24784/16 AND MIL-M-24784/17).

MIL-M-15071H, MILITARY SPECIFICATION MANUALS, TECHNICAL: EQUIPMENTS AND SYSTEMS CONTENT REQUIREMENTS FOR (17 JUL 1991) (S/S BY MIL-M-24784, MIL-M-24784/1, MIL-M-24784/2, MIL-M-24784/4, MIL-M-24784/12, MIL-M-24784/13, MIL-M-24784/14, MIL-M-24784/15, MIL-M-24784/16 AND MIL-M-24784/17)., This specification sets forth Naval Sea Systems Command (NAVSEA) and Naval Electronic Systems Command (NAVELEX) content requirements for manuals necessary for installation, operation, organizational-, intermediate-, and depot-level maintenance, repair, and parts support (without services of manufacturer's representatives) of equipment and systems.

MIL-M-15562F (AMENDMENT 4), DETAIL SPECIFICATION, MATTING OR SHEET, FLOOR COVERING, INSULATING FOR HIGH VOLTAGE APPLICATION (30 MAR 1987). This amendment forms a part of MIL-M-1556F (NAVY, dated 7 December 1977, and is approved for use within the Department of the Navy and is available for use by all Departments and Agencies of the Department of Defense.

MIL-M-15562F, DETAIL SPECIFICATION, MATTING OR SHEET, FLOOR COVERING, INSULATING FOR HIGH VOLTAGE APPLICATION (7 DEC 1977)., This specification covers rubber or plastic matting and sheet floor coverings for use around electrical apparatus or circuits, as a safety measure to protect personnel from accidental exposure to electrical potentials not exceeding 3000 volts. Equipment operating at higher voltages utilize other built-in safety measures to provide personnel protection.

MIL-M-15842B, MILITARY SPECIFICATION, MORTAR, REFRACTORY (HIGH TEMPERATURE, AIR SETTING) (24 AUG 1964)., This specification covers dry air-setting refractory mortar for use in laying and bonding refractory brick in ship boiler furnaces; and wet air-setting refractory mortar for use in laying refractory brick in Naval stationary boiler furnaces, bright annealing furnaces, controlled atmosphere furnaces, and furnaces heated by electric elements. MIL-M-29190A(YD) (NOTICE 2), MILITARY SPECIFICATION, MONITORING DEVICES, EMISSION; STACK RELATED (25 MAY 1998)., Military Specification MIL-M-29190A(YD), dated 25 July 1991, is hereby canceled. Future acquisition of this material should refer to Commercial Item Description A-A-50566.

MIL-M-18012B (AMENDMENT 3), MILITARY SPECIFICATION, MARKINGS FOR AIRCREW STATION DISPLAYS DESIGN AND CONFIGURATION OF (15 MAR 1989) [S/S BY SAE-AS18012].

MIL-M-18012B (AMENDMENT 3), MILITARY SPECIFICATION MARKINGS FOR AIRCREW STATION DISPLAYS DESIGN AND CONFIGURATION OF (15 MAR 1989 ) [S/S BY SAE-AS18012]., This amendment forms a part of Military Specification MIL-M-18012B, dated 20 July 1964, and is approved for use by all Departments and Agencies of the Department of Defense.

MIL-M-18012B, MILITARY SPECIFICATION MARKINGS FOR AIRCREW STATION DISPLAYS DESIGN AND CONFIGURATION OF (20 JUL 1964) [S/S BY SAE-AS18012]., This specification covers the design requirements and configuration of letters, numerals,and identification for aircrew station displays and control panels.

MIL-M-20693B, MILITARY SPECIFICATION MOLDING, PLASTIC, POLYAMIDE (NYLON), RIGID (10 FEB 1977) (S/S BY ASTM-D4066)., This specification covers rigid polyamide (nylon) molding plastic to be used for general-purpose, weather-resistant, and dielectric applications.

MIL-M-24519E, MILITARY SPECIFICATION MOLDING PLASTICS, ELECTRICAL, THERMOPLASTIC (3 MAR 1992)., This specification covers the basic properties of thermoplastic molding compounds used to mold electric and electronic component parts.

MIL-M-24784 (SUPPLEMENT 1), MILITARY SPECIFICATION MANUALS, TECHNICAL: GENERAL ACQUISITION AND DEVELOPMENT REQUIREMENTS, GENERAL SPECIFICATION FOR (6 SEP 1994).

MIL-M-24784, MILITARY SPECIFICATION MANUALS, TECHNICAL: GENERAL ACQUISITION AND DEVELOPMENT REQUIREMENTS, GENERAL SPECIFICATION FOR (6 SEP 1994)., This specification establishes the general acquisition and development requirements needed to prepare digital technical information for multi-output presentation of NAVSEA Technical Manuals (TMs) (see 6.4.21). The technical content and style and format requirements contained in this specification can be used to develop and assemble complete TMs for ships, shipboard systems (see 6.4.20), and equipment. The requirements apply to the output of paper TMs or, to the display of page-oriented linear and non-linear Interactive Electronic Technical Manuals (IETMs) (see 6.4.10) on an Electronic Display System (EDS).

MIL-M-25047C (ASG), MILITARY SPECIFICATION MARKINGS AND EXTERIOR FINISH COLORS FOR AIRPLANES, AIRPLANE PARTS, AND MISSILES (BALLISTIC MISSILES EXCLUDED) (18 JUN 1968)., This specification covers the markings used in identification of aircraft and missile, major structural assemblies, fuselage, plumbing, wiring controls, and parts.

MIL-M-26075D (NOTICE 1), MILITARY SPECIFICATION, MAGNESIUM-ALLOY SHEET AND PLATE (HK31A) (18 JUL 1988) [S/S BY AMS4384F, AMS4385G].

MIL-M-26075D, MILITARY SPECIFICATION, MAGNESIUM-ALLOY SHEET AND PLATE (HK31A) (6 MAR 1969) [S/S BY AMS4384F, AMS4385G]., This specification covers magnesium-alloy (HK31A) sheet and plate.

MIL-M-26881A (NOTICE 1), MILITARY SPECIFICATION, METER, VOLUMETRIC, POSITIVE DISPLACEMENT, LIQUID, AIRCRAFT FUEL, 600 GPM (17 MAY 1982) [S/S BY MIL-M-28519].

MIL-M-27586C, MILITARY SPECIFICATION MANUAL, TECHNICAL AND CHECKLIST. NUCLEAR MUNITIONS LOADING PROCEDURES, STRATEGIC BOMBER AIRCRAFT, PREPARATION OF (1 OCT 1970) [S/S BY MIL-M-9977]., This specification covers the detail requirements for the preparation of technical manuals for loading nuclear munitions on or into strategic bomber aircraft.

MIL-M-28519A (NOTICE 1), MILITARY SPECIFICATION, METER, VOLUMETRIC, POSITIVE DISPLACEMENT, LIQUID, AIRCRAFT FUEL, 600 GPM (30 SEP 1991) [S/S BY GG-M-2742].

MIL-M-28519A, MILITARY SPECIFICATION, METER, VOLUMETRIC, POSITIVE DISPLACEMENT, LIQUID, AIRCRAFT FUEL, 600 GPM (11 JUN 1984 [S/S BY GG-M-2742]., This specification covers a 600 gallons per minute (GPH) aircraft fuel positive displacement meter.

MIL-M-28787D (NOTICE 1), MILITARY SPECIFICATION, MODULES, STANDARD ELECTRONIC, GENERAL SPECIFICATION FOR (4 APR 1998)., MIL-M-28787D, dated 30 March 1989, is inactive for new design and is no longer used, except for replacement purposes.

MIL-M-28787D (SUPPLEMENT 1), MILITARY SPECIFICATION, MODULES, STANDARD ELECTRONIC, GENERAL SPECIFICATION FOR (30 MAR 1989).

MIL-M-28787D, MILITARY SPECIFICATION, MODULES, STANDARD ELECTRONIC, GENERAL SPECIFICATION FOR (30 MAR 1989)., This specification establishes the requirements for Standard Electronic Modules (SEM) as defined in MIL-STD-1378 for the Standard Hardware Acquisition and Reliability Program (SHARP) for use in military systems. The requirements herein serve to verify the design requirements of MIL-SD-1389. Specific requirements for a particular module are listed in the associated detail specifications.

MIL-M-29190A(YD) (NOTICE 2), MILITARY SPECIFICATION, MONITORING DEVICES, EMISSION; STACK RELATED (25 MAY 1998)., Military Specification MIL-M-29190A(YD), dated 25 July 1991, is hereby canceled. Future acquisition of this material should refer to Commercial Item Description A-A-50566.

MIL-M-29241(NOTICE 1), MILITARY SPECIFICATION, PERFORMANCE SPECIFICATIONS FOR MATERIAL HANDLING UNITS FOR MEDICAL FACILITIES (1 APR 1991)., MIL-M-29241, dated 10 May 1985, has been reviewed and determined to be valid for use in acquisition.

MIL-M-3171C (AMENDMENT 1), MILITARY SPECIFICATION, MAGNESIUM ALLOY, PROCESSES FOR PRETREATMENT AND PREVENTION OF CORROSION ON (14 MAR 1974) [S/S BY SAE-AMS-M-3171].

MIL-M-3171C, MILITARY SPECIFICATION, MAGNESIUM ALLOY, PROCESSES FOR PRETREATMENT AND PREVENTION OF CORROSION ON (11 JUL 1966) [S/S BY SAE-AMS-M-3171]., This specification covers general requirements for the apparatus, material, and procedures to be used in the processing of magnesium base alloys for the purpose of increasing their corrosion resistance and by producing surfaces suitable for organic paint finish systems.

MIL-M-38310B (AMENDMENT 2) (USAF). MASS PROPERTIES CONTROL REGUIREMENTS FOR MISSILE AND SPACE VEHICLES (SS BY MIL-STD-1811). This document provides a means to establish a system for the management of mass properties during the conceptual, validation, development, production and deployment of surface-to-surface ballistic vehicles and space vehicles, or portions thereof.

MIL-M-38310B (NOTICE - CANCELLATION 1) (USAF). MASS PROPERTIES CONTROL REQUIREMENTS FOR MISSILE AND SPACE VEHICLES (SS BY MIL-STD-1811).PDF. This document provides a means to establish a system for the management of mass properties during the conceptual, validation, development, production and deployment of surface-to-surface ballistic vehicles and space vehicles, or portions thereof.

MIL-M-38310B (USAF). MASS PROPERTIES CONTROL REGUIREMENTS FOR MISSILE AND SPACE VEHICLES (SS BY MIL-STD-1811).PDF. This document provides a means to establish a system for the management of mass properties during the conceptual, validation, development, production and deployment of surface-to-surface ballistic vehicles and space vehicles, or portions thereof.

MIL-M-38510J, MILITARY SPECIFICATION, MICROCIRCUITS, GENERAL SPECIFICATION FOR. This specification establishes the general requirements for monolithic, multichip, and hybrid microcircuits and the quality and reliability assurance requirements which must be met in the acquisition of microcircuits.

MIL-M-38527 (NOTICE 2), MILITARY SPECIFICATION MOUNTING PADS, ELECTRICAL-ELECTRONIC COMPONENT, GENERAL SPECIFICATION FOR. MIL-M-38527D, dated 6 November 1992, is hereby canceled. Future acquisition for this material should refer to Commercial Item Description (CID) A-A-55485B.

MIL-M-38748A (AMENDMENT 1), MILITARY SPECIFICATION, MICROFICHE, FOR ENGINEERING/TECHNICAL DATA, REPORTS, STUDIES AND RELATED DATA, REQUIREMENTS FOR (20 MAY 1977).

MIL-M-38748A (NOTICE 1), MILITARY SPECIFICATION, MICROFICHE, FOR ENGINEERING/TECHNICAL DATA, REPORTS, STUDIES AND RELATED DATA, REQUIREMENTS FOR (1 JUN 1996)., MIL-M-38748A, including Amendment 1, dated 20 May 1977, is hereby canceled without replacement.

MIL-M-38748A, MILITARY SPECIFICATION, MICROFICHE, FOR ENGINEERING/TECHNICAL DATA, REPORTS, STUDIES AND RELATED DATA, REQUIREMENTS FOR (1 DEC 1970)., This specification covers the detail requirements for the filming of engineering and technical data, reports, studies and related information, preparation of microfiche and reproduction copies thereof by the Department of Defense or by its contractors. Microfiche produced in accordance with the requirements of this specification shall be of the size cited herein

MIL-M-38780A (AMENDMENT 1), MILITARY SPECIFICATION, MANUAL, TECHNICAL: NONDESTRUCTIVE INSPECTION (4 APR 1973) [S/S BY MIL-M-87929].

MIL-M-38780A, MILITARY SPECIFICATION, MANUAL, TECHNICAL: NONDESTRUCTIVE INSPECTION (1 FEB 1973) [S/S BY MIL-M-87929]., This specification contains instructions for the preparation of technical manuals required for the application of nondestructive inspection (NDI) methods on aircraft (-36) manual), missiles and space weapons (-26manuals), and engines (-9manual). Instructions for the preparation of NDI methods to be included in maintenance manuals for components and equipment not requiring a separate manual (-36, -26, -9 are also provided.

MIL-M-38784C (INTERIM AMENDMENT 1 (ARMY)), MILITARY SPECIFICATION, MANUALS, TECHNICAL: GENERAL STYLE AND FORMAT REQUIREMENTS (13 MAR 1987) [SUPERSEDED BY MIL-STD-38784].

MIL-M-38784C (NOTICE 1), MILITARY SPECIFICATION, MANUALS, TECHNICAL: GENERAL STYLE AND FORMAT REQUIREMENTS (3 JUL 1995) [SUPERSEDED BY MIL-STD-38784].

MIL-M-38784C, MILITARY SPECIFICATION, MANUALS, TECHNICAL: GENERAL STYLE AND FORMAT REQUIREMENTS (16 APR 1983) [SUPERSEDED BY MIL-STD-38784]., This specification covers the general style and format requirements for the preparation of manuscripts and reproducible copy for standard technical manuals and changes theret

MIL-M-38793/1A (EC), MILITARY SPECIFICATION SHEET MANUALS, TECHNICAL: CALIBRATION PROCEDURES, SUBMISSION OF (17 DEC 1971)., This specification covers the Naval Electronic Systems Command detail requirements for the preparation and submission of instrument calibration procedures for test and measuring equipment.

MIL-M-38796A, MILITARY SPECIFICATION MANUALS, TECHNICAL: ORGANIZATIONAL, INTERMEDIATE MAINTENANCE, AND/OR DEPOT OVERHAUL INSTRUCTIONS WITH ILLUSTRATED PARTS BREAKDOWN (FOR SPECIAL SHIPPING AND STORAGE CONTAINERS (EMPTY) FOR NON-NUCLEAR MUNITIONS) (1 AUG 1977) (S/S BY MIL-M-87929).,This specification covers the requirements for preparation of technical manuals for organizational, intermediate maintenance, andor depot overhaul instructions with illustrated parts breakdown for special shipping and storage containers (empty) for non-nuclear munitions. The level of maintenance shall be determined by the processing activity.

MIL-M-3935C (AMENDMENT 1), MILITARY SPECIFICATION, MARKER, SELF-LUMINOUS (11 JAN 1972).

MIL-M-3935C, MILITARY SPECIFICATION, MARKER, SELF-LUMINOUS (18 MAR 1970)., This specification covers self-luminous markers.

MIL-M-43719C, MILITARY SPECIFICATION, MARKING MATERIALS AND MARKERS, ADHESIVE, ELASTOMERIC, PIGMENTED; GENERAL SPECIFICATION FOR (30 SEP 1992) [SUPERSEDING MIL-D-8635B]., This specification covers the general requirements for adhesive-backed, pigmented, elastomeric marking materials (see 6.1) in roll and sheet form.

MIL-M-45013D (AMENDMENT 2), MILITARY SPECIFICATION MACHINE GUN, 7.62MM: M60 (26 OCT 1984).

MIL-M-45013D, MILITARY SPECIFICATION MACHINE GUN, 7.62MM: M60 (5 JUL 1972)., This specification covers the requirements, examinations and tests for one type of 7.62mm, gas operated, air cooled, link belt fed, lightweight machine gun furnished with one spare interchangeable barrel assembly with biped assembly (see 6.1)

MIL-M-45013E (NOTICE 1), MILITARY SPECIFICATION MACHINE GUN, 7.62MM: M60 (1 DEC 1995)., This notice should be filed in front of MIL-M-45013E (AR), dated 28 February 1994. MIL-M-45013E(AR), dated 28 February 1994, is inactive for new design and is no longer used, except for replacement purposes.

MIL-M-45013E, MILITARY SPECIFICATION MACHINE GUN, 7.62MM: M60 (28 FEB 1994)., This specification covers the requirements, examinations and tests for one type of 7.62mm, gas operated, air cooled, link belt fed, lightweight machine gun furnished with one spare interchangeable barrel assembly with biped assembly (see 6.1).

MIL-M-45202C, MILITARY SPECIFICATION MAGNESIUM ALLOY, ANODIC TREATMENT OF (1 APR 1981) (S/S BY ASTM-D1732)., This specification covers the requirements for equipment, materials, and procedures to be used in anodic treatments for magnesium base alloys for the purpose of increasing their corrosion resistance or for producing surfaces suitable for the application of a protective organic finish.

MIL-M-46130 (AMENDMENT 1), MILITARY SPECIFICATION, MAGNESIUM-LITHIUM ALLOY PLATE, SHEET AND FORGINGS (LA141A, LS141A AND LZ145A) (26 JUN 2002)., This amendment forms a part of MIL-M-46130, dated 28 April 1972, and is approved for use by all Departments and Agencies of the Department of Defense.

MIL-M-46130, MILITARY SPECIFICATION, MAGNESIUM-LITHIUM ALLOY PLATE, SHEET AND FORGINGS (LA141A, LS141A AND LZ145A) (28 APR 1972)., This specification covers magnesium-lithium alloy plate, sheet and forgings (LA141A, LS141A, and LZ145A.

MIL-M-49502 (TM) (AMENDMENT 1), MILITARY SPECIFICATION, MANUALS, TECHNICAL: REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) (1 SEP 1994) [S/S BY MIL-STD-40051]., This amendment forms part of MIL-M-63004C (TM), dated 6 November 1990, and is approved for use by the Department of the Army, and is available for use by all Departments and Agencies of the Department of Defense.

MIL-M-49502 (TM), MILITARY SPECIFICATION, MANUALS, TECHNICAL: REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) (11 APR 1988) [S/S BY MIL-STD-40051]., This specification contains the detail requirements for preparing repair parts and special tools 1ists (RPSTL) .

MIL-M-52599B, MILITARY SPECIFICATION, MEMBRANE SURFACING: RUNWAYS, TAXIWAYS, HELIPADS AND SPLICING (14 MAY 1992)., This specification covers three types of coated fabric membrane.

MIL-M-55565C, MILITARY SPECIFICATION, MICROCIRCUITS, PACKAGING OF (15 AUG 2001) [S/S BY MIL-STD-2073-1]., MIL-M-55565C, dated 9 November 1988, is hereby canceled. Future acquisitions should refer to MIL-STD-2073-1, “Standard Practice for Military Packaging”.

MIL-M-6002A, MILITARY SPECIFICATION MARKING; STANDARD HOSE, AIRCRAFT (30 MAR 1982) [S/S BY SAE-ARP6002]., This specification covers one type and grade of marking suitable for the identification of rubber and synthetic rubber hose.

MIL-M-63018A, MILITARY SPECIFICATION, MANUAL, TECHNICAL, NON-NUCLEAR EXPLOSIVE ORDNANCE DISPOSAL (2 DEC 1976)., This specification covers technical content requirements for the preparation of Explosive Ordnance Disposal (EOD) manuals relating to U.S. nonnuclear explosive ordnance, all categories of foreign explosive ordnance, and aircraft weapons systems.

MIL-M-63041F, MILITARY SPECIFICATION MANUALS, TECHNICAL: DEPOT MAINTENANCE WORK REQUIREMENTS (DMWR) (21 SEP 1993)., This manual contains the requirements for preparation of DMWR for Army material expect conventional and chemical ammunition.

MIL-M-63356A (NOTICE 1), MILITARY SPECIFICATION, MACHINE GUN, 7.62MM: M240C (22 MAR 1988)., MIL?M-63356A(AR), dated 21 April 1981, has been reviewed and determined to be valid for use in acquisition.

MIL-M-63356A, MILITARY SPECIFICATION, MACHINE GUN, 7.62MM: M240C (21 APR 1981)., This specification establishes the performance, design, development, manufacturing, packaging and quality assurance requirements for one type of 7.62 millimeter (MM) gas operated, air cooled, link belt fed, light weight, machine gun furnished with one spare interchangeable barrel assembly in carrying case and one ruptured cartridge case extractor. This machine gum is for use as a coaxial weapon in-tank application or other vehicle.

MIL-M-6857D, MAGNESIUM ALLOY CASTINGS, HEAT TREATMENT OF (29 MAR 1974)., This specification covers the requirements for the heat treatment of magnesium alloy castings. This specification covers furnace equipment requirements, and general information for heat treating procedures and heat treating temperatures for magnesium alloys.

MIL-M-70446A(AR), MILITARY SPECIFICATION MACHINE GUN, 5.56 MM: M249 (30 MAR 1993)., This specification establishes the performance, firing and quality assurance requirements for the assembly, testing, inspection and packaging for the, Machine Gunt 5.56 mm: M249 with equipment and one assigned barrel.

MIL-M-7298E, MILITARY SPECIFICATION, MANUALS, COMMERCIAL OFF-THE-SHELF (COTS) (1 FEB 1988) [S/S BY MIL-HDBK-1221]., This specification provides evaluation criteria for acceptance of manuals and provides the requirements for supplemental data for selection by the contracting activity. For the purposes of this specification the term “manual” means the same as COTS or COTS manual.

MIL-M-7594 (NOTICE 1), MILITARY SPECIFICATION, METER, AIRCRAFT FUEL, 600 GPM, TYPE F-2 (8 MAY 1972) [S/S BY MIL-M-26881].

MIL-M-8090F, MILITARY SPECIFICATION, MOBILITY, TOWED AEROSPACE GROUND EQUIPMENT (AGE), GENERAL REQUIREMENTS FOR (1 FEB 1974) [S/S BY SAE-AS8090]., This specification covers general design and performance requirements for the mobility of towed ground support equipment. The complete mobility requirements for an item of towed aerospace ground equipment not specific herein shall be specified in the individual equipment specification (see 6.4).

MIL-M-8153, MILITARY SPECIFICATION, MARKING OF ELECTRICAL INSULATING MATERIALS (2 MAY 1967) (S/S BY SAE-AS5942)., This specification establishes performance requirements for markings that have been applied to electrical insulating materials.

MIL-M-82002D (AMENDMENT 1), MILITARY SPECIFICATION, MANIFOLD AND ACCESSORY ASSEMBLIES, PORTABLE FUEL DISTRIBUTION SYSTEMS, QUICK-DISCONNECT HOSE COUPLING TYPE (14 AUG 1995)., This amendment forms a part of MIL-M-82002D, dated 03 October 1990, and is approved for use by all Departments and Agencies of the Department of Defense.

MIL-M-82002D (AMENDMENT 1), MILITARY SPECIFICATION, MANIFOLD AND ACCESSORY ASSEMBLIES, PORTABLE FUEL DISTRIBUTION SYSTEMS, QUICK-DISCONNECT HOSE COUPLING TYPE (14 AUG 1995)., This amendment forms a part of MIL-M-82002D, dated 03 October 1990, and is approved for use by all Departments and Agencies of the Department of Defense.

MIL-M-83496, MILITARY SPECIFICATION, MANUAL, TECHNICAL: ORGANIZATIONAL MAINTENANCE INSTRUCTIONS CONDENSED MAINTENANCE GUIDE (AVIONICS SYSTEMS) (15 NOV 1975)., This specification covers the detail requirements for preparation of maintenance instructions to be used by highly qualified and trained technicians on aircraft avionics systems. Data for these instructions is condensed and consolidated information extracted from conventional maintenance manuals for use in selected check and adjustment procedures on avionic systems. It also covers the preparation of negatives, printing requirements and binders for Condensed Maintenance Guides. When the requirements of any technical content specification conflict with the requirements herein, the requirements of this specification shall apply.

MIL-M-85025A (AS), DOD DETAIL SPECIFICATION NATOPS PROGRAM TECHNICAL PUBLICATIONS AND PRODUCTS; STYLE, FORMAT, AND COMMON TECHNICAL CONTENT (8 DEC 1980)., This specification covers general style, format, and technical content requirements for preparation of Naval Air Training and Operating Procedures Standardization (NATOPS) flight manuals.

MIL-M-85337A, MILITARY SPECIFICATION MANUAL, TECHNICAL, QUALITY ASSURANCE PROGRAM, REQUIREMENTS FOR (15 NOV 1984)., This specification establishes technical manual quality assurance (TMQA) requirements necessary to ensure the adequacy and accuracy of TM content through a coordinated contractor and government program. The quality assurance (QA) terms and definitions used in this specification are consistent with those contained in MIL-STD-109 except as defined in 6.3. Procedures are established for the development and implementation of a contractor program encompassing the conduct of TMQA program reviews, quality reviews, in-process reviews adequacy reviews, validation, and verification requirements.

MIL-M-8555C, MILITARY SPECIFICATION, MISSILES, GUIDED, DESIGN AND CONSTRUCTION, GENERAL SPECIFICATION FOR (4 MAY 1984)., This specification establishes the requirements for the performance, design, construction, and inspection of guided missiles. Acquisition of guided missiles shall be covered by a detail specification or specification sheet to be prepared by the contractor or acquiring activity.

MIL-M-8609B (NOTICE 1), MILITARY STANDARD MOTOR, DC, 28 VOLT SYSTEM, AIRCRAFT, GENERAL SPECIFICATION FOR (12 DEC 1987)., MIL-M-8609B, dated 12 July 1965, has been reviewed and determined to be current.

MIL-M-8609B (NOTICE 2), MILITARY STANDARD MOTOR, DC, 28 VOLT SYSTEM, AIRCRAFT, GENERAL SPECIFICATION FOR (28 AUG 1996)., MIL-M-8609B IS INACTIVE FOR NEW DESIGN AND IS NO LONGER USED EXCEPT FOR REPLACEMENT PURPOSES.

MIL-M-8609B, MILITARY STANDARD MOTOR, DC, 28 VOLT SYSTEM, AIRCRAFT, GENERAL SPECIFICATION FOR (26 JUL 1965)., This specification covers the general requirements for two classes of aircraft electric motors and, together with a detail specification or standard containing equivalent information as described in 3.4.2, forms the complete specification for procurement of aircraft electric motors operable from 28v dc systems

MIL-M-8856B (AMENDMENT 1), MILITARY SPECIFICATION MISSILES, GUIDED, STRUCTURAL INTEGRITY GENERAL SPECIFICATION FOR (22 JUL 1991)., This amendment forms a part of MIL-M-8856B, dated 22 October 1990, and is approved for use by all departments and agencies of the Department of Defense.

MIL-M-8856B, MILITARY SPECIFICATION MISSILES, GUIDED, STRUCTURAL INTEGRITY GENERAL SPECIFICATION FOR (22 OCT 1990)., This specification establishes the structural performance and verification requirements for guided missiles. The requirements of this specification are established to assure that guided missiles delivered to operational units have adequate structural integrity to accomplish their intended purposes.

MIL-M-8910 (NOTICE 1) MANUAL, TECHNICAL, ILLUSTRATED PARTS BREAKDOWN, PREPARATION OF (28 NOV 1972) [SUPERSEDED BY MIL-M-008910 AND MIL-M-38807 FOR USAF USE] [SUPERSEDING MIL-B-5005A].

MIL-M-910F, MILITARY SPECIFICATION MATS, FLOOR, STANDING (9 AUG 1991)., This specification covers floor mats that reduce personnel fatigue due to vibration and long periods of standing.

MIL-M-9868E, MICROFILMING OF ENGINEERING DATA, 35mm, REQUIREMENTS FOR (10 FEB 1993)., The principal objective is to prescribe microfilming requirements and testing guidance for engineering data (see 6.4.1) source document filming and delivery of the filmed images to primary DoD repositories (see 3.1.2.2).

MIL-M-9913B (USAF) (NOTICE 1), MILITARY SPECIFICATION, MANUALS, TECHNICAL: INSPECTION, REPAIR AND PACKING INSTRUCTIONS (FOR PARACHUTES) (14 JUN 1991) [S/S BY MIL-M-87929]., MIL-M-9913B(USAF), dated 15 July 1982, is hereby canceled. For new acquisitions use latest issue of MIL-M-87929(USAF). Use “same style and format” for maintenance of existing Technical Manuals.

MIL-M-9913B, MILITARY SPECIFICATION, MANUALS, TECHNICAL: INSPECTION, REPAIR AND PACKING INSTRUCTIONS (FOR PARACHUTES) (15 JUL 1982) [S/S BY MIL-M-87929]., This specification covers the preparation of technical manuals for inspection, repair, and packing instruction for personnel, cargo, aerial delivery and aircraft deceleration parachutes.

MIL-M-9950A, MILITARY SPECIFICATION, MISSILE COMPONENTS, LIQUID OXYGEN, LIQUID NITROGEN, GASEOUS OXYGEN, GASEOUS NITROGEN, INSTRUMENT AIR, HELIUM AND FUEL HANDLING SYSTEMS; CLEANING AND PACKAGING FOR DELIVERY (20 MAR 1992)., This specification describes the cleaning and packaging for delivery of individual components of liquid oxygen (LOX), liquid nitrogen, and service gas handling systems of the airborne and launch site ground systems of all missiles using LOX or kerosene propellant rocket engine fuel.

MIL-N-25027/1A, MILITARY SPECIFICATION NUT, SELF-LOCKING, HEAVY HEX, (NON-METALLIC INSERT) 250 DEGREES AND 450 DEGREES F, UNJC-3B, 1/4 THROUGH 2-1/2 INCH NOMINAL DIAMETERS, NICKEL-COPPER ALLOY (28 APR 1995) [S/S BY MIL-DTL-32258]., This specification covers the requirements for nickel-copper alloy, self-locking nuts.

MIL-N-27444D, MILITARY SPECIFICATION, NET CARGO TIEDOWN, PALLETS, HCU-7/E, HCU-15/C, HCU-11/C, and HCU-16/C (2 JAN 1986)., This specification covers pallet cargo tiedown nets, designated HCU-7/E, HCU-15/C, HCU-11/C and HCU-16C.

MIL-N-43617, MILITARY SPECIFICATION, NET, CARGO TIEDOWN, AIRCRAFT PLATFORM, ASSEMBLY (31 DEC 1968)., This specification covers one type of aircraft platform cargo tiedown assembly having a capacity of 12,000 pounds.

MIL-N-55392A, MILITARY SPECIFICATION, NICKEL-CARBON, POROUS, ELECTRO-DEPOSITED, FOR CAMOUFLAGE (18 JAN 1983)., This specification covers the requirements for the electro-deposition of porous nickel-carbon plate on aluminum, steel and copper alloys to provide a lusterless, abrasion resistant, conductive, camouflage finish on electronic hardware (see 6.1).

MIL-N-7873B, MILITARY SPECIFICATION, NUT, SELF-LOCKING, 1,200 DEG. F (26 MAY 1994) [S/S BY NASM7873]., This specification covers self-locking nuts and self-locking plate nuts for use where temperatures will not exceed 1,200 deg. F.

MIL-N-81497A (AMENDMENT 2), MILITARY SPECIFICATION, NAVIGATION SET, INERTIAL, AN/ASN-84 (25 APR 1972)., This Amendment forms a part of Military Specification MIL-N-81497A(AS) date 15 March 1970 and has been approved by the Naval Air Systems Command, Department of the Navy.

MIL-N-81497A, MILITARY SPECIFICATION, NAVIGATION SET, INERTIAL, AN/ASN-84 (15 MAR 1970)., The equipment covered by this specification shall, by means of inertial instruments, provide aircraft azimuth, attitude, velocity and position outputs.

MIL-N-81604C, MILITARY SPECIFICATION, NAVIGATION SET, INERTIAL, AN/ASN-92(V) (3 DEC 1976)., The equipment covered by this specification shall provide aircraft navigation functions (by means of inertial measurement and computer control) after a rapid inertial alignment.

MIL-N-81678B, MILITARY SPECIFICATION NAVIGATIONAL SET, OMEGA AN/ARN-99(V) (17 FEB 1977)., The equipment covered by this specification shall perform a navigation function by utilizing information from the Very Low Frequency global OMEGA navigation system, automatically and continuously with minimum operator assistance.

MIL-N-85353 (AMENDMENT 1), MILITARY SPECIFICATION, NUTS (FASTENERS), INTERNALLY THREADED, PRELOAD LOCKING, 450 DEG. F, 800 DEG. F AND 1200 DEG. F, GENERAL SPECIFICATION FOR (23 NOV 1999) ]S/S BY NASM85353]., This amendment forms a part of MIL-N-85353, dated 15 JULY 1981, and is approved for use by all Departments and Agencies of the Department of Defense.

MIL-N-85353, MILITARY SPECIFICATION, NUTS (FASTENERS), INTERNALLY THREADED, PRELOAD LOCKING, 450 DEG. F, 800 DEG. F AND 1200 DEG. F, GENERAL SPECIFICATION FOR (15 JUL 1981) ]S/S BY NASM85353]., This specification covers the requirements for preload locking nuts (hereinafter referred to as internally threaded fasteners) to be used in applications where temperatures will not exceed 450 deg. F, 800 deg. F, and 1200 deg. F.

MIL-O-37997, MILITARY SPECIFICATION, OXYGEN GAS, USP, HIGH PRESSURE, CYLINDER (18 DEC 1985)., This specification covers filled oxygen cylinders for medical applications.

MIL-O-87243, MILITARY SPECIFICATION, OFFENSIVE AVIONICS (30 MAY 1986)., This specification establishes the performance and verification requirements for the offensive avionics system to be used in the weapon system.