    |
MIL SPECS (MIL-C)Ident. Num: MIL-C-005011 Rev. Num: B MIL-C-005011B, MILITARY SPECIFICATION CHARTS. STANDARD AIRCRAFT CHARACTERISTICS AND PERFORMANCE, PILOTED AIRCRAFT (FIXED WING) (21 JUN 1977)., This specification governs the definitions of requirements for, and methods of presenting characteristics and,performances for military piloted airplanes. This specification while primarily oriented to conventional take-off and landing (CTOL) aircraft may be applied to STOL and VIWL airplanes if the design criteria established by requirements for specific designs are substituted for the C~L criteria established herein. Ident. Num: MIL-C-10065 Rev. Num: B MIL-C-10065B, MILITARY SPECIFICATION CABLES, SPECIAL PURPOSE, ELECTRICAL (MULTIPAIR, AUDIO FREQUENCY) (7 SEPT 1966)., This specification covers multipair, styrene butadlene rubber (SBR)insulated and jacketed, flexible audio frequency cables. Ident. Num: MIL-C-10296 Rev. Num: J MIL-C-10296J, MILITARY SPECIFICATION, CLOTH, SATEEN, COTTON (12 SEP 1986)., This document covers cotton sateen cloth. Ident. Num: MIL-C-10369D Rev. Num: D MIL-C-10369D (AMENDMENT 2), MILITARY SPECIFICATION CABLE, TELEPHONE, FIELD, FOR RAPID PAYOUT (MX-306 A/G) (11 FEB 1987)., This amendment forms a part of Military Specification MIL-C-10369D dated 10 May 1968, and is approved for use by all departments and Agencies of the Department of Defense. Ident. Num: MIL-C-10369 Rev. Num: D MIL-C-10369D, MILITARY SPECIFICATION CABLE, TELEPHONE, FIELD, FOR RAPID PAYCUT (MX-306A/G) (10 MAY 1968)., This specification covers the materials and processes necessary to prepare Wire WD-1/TT and Wire WD-14/TT for rapid dispensing. Ident. Num: MIL-C-10382 Rev. Num: D MIL-C-10382D, MILITARY SPECIFICATION CORROSION PREVENTIVE, PETROLATUM, SPRAYING APPLICATION: FOR FOOD HANDLING MACHINERY AND EQUIPMENT (6 OCT 1983)., This specification covers one grade of petroleum base corrosion preventive suitable for use by spraying application on food handling machinery and equipment. Ident. Num: MIL-C-104 Rev. Num: C MIL-C-104C (AMENDMENT 1), MILITARY SPECIFICATION CRATES, WOOD: LUMBER AND PLYWOOD SHEATHED, NAILED, AND BOLTED (24 JUN 1993). Ident. Num: MIL-C-104 Rev. Num: C MIL-C-104C, MILITARY SPECIFICATION CRATES, WOOD: LUMBER AND PLYWOOD SHEATHED, NAILED, AND BOLTED (30 MAR 1992)., This specification covers requirements for two types and two classes of sheathed crates each of which may have two styles of bases. The crates are designed for net leads not exceeding 30,000 pound (lb) and to withstand the most severe overseas shipping and storage conditions Ident. Num: MIL-C-10799 Rev. Num: H MIL-C-10799H, MILITARY SPECIFICATION, CLOTH, COATED, COTTON, VINYL COATED, FIRE AND MILDEW RESISTANT (29 MAR 1983)., This document covers the requirements for waterproof, fire and mildew resistant, vinyl-coated cotton cloth Ident. Num: MIL-C-11015/19 Rev. Num: E MIL-C-11015/18E, MILITARY SPECIFICATION SHEET CAPACITORS, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE), STYLE CK05 (14 MAY 2001)., The requirements for acquiring the capacitors described herein shall consist of this specification and MIL-C-11015. Ident. Num: MIL-C-11015/19 Rev. Num: F MIL-C-11015/19E, MILITARY SPECIFICATION SHEET CAPACITORS, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE), STYLE CK06 (14 MAY 2001)., The requirements for acquiring the capacitors described herein shall consist of this specification and MIL-C-11015. Ident. Num: MIL-C-11015 Rev. Num: E MIL-C-11015E (SUPPLEMENT 1), MILITARY SPECIFICATION CAPACITORS, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE) (14 MAY 2001)., This supplement forms a part of MIL-C-11015E, dated 14 May 2001. Ident. Num: MIL-C-11015 Rev. Num: E MIL-C-11015E, MILITARY SPECIFICATION CAPACITORS, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE) (14 MAY 2001)., This specification covers the general requirements for general purpose, ceramic dielectric, insulated, fixed capacitors for use in applications where variations in capacitance with respect to temperature, voltage, frequency, and life can be tolerated. Ident. Num: MIL-C-11097 Rev. Num: B MIL-C-11097B, MILITARY SPECIFICATION CABLE, TELEPHONE (W-50-A) (12 JUL 1961)., This specification covers one type of twisted pair cable designated as Wire W-50-A, consisting of two hard drawn 4107 circular mil(No. 14 AWG) coated copper wires separately insulated with a styrene butadiene rubber (SBR) insulating compound followed by a chloroprene rubber (CR) jacketing compound and twisted together to form a finished cable. Ident. Num: MIL-C-1164 Rev. Num: G MIL-C-1164G, MILITARY SPECIFICATION, CLOTH, TERRY, COTTON, COTTON AND POLYESTER (26 OCT 1984)., This specification covers the requirements for terry cloth of one type only Ident. Num: MIL-C-11796 Rev. Num: C MIL-C-11796C, MILITARY SPECIFICATION CORROSION PREVENTIVE COMPOUND, PETROLATUM HOT APPLICATION (4 NOV 1986)., This specification covers a suitable formulated petrolatum-base corrosion preventive compound. Ident. Num: MIL-C-12369 Rev. Num: F MIL-C-12369F (AMENDMENT 1), MILITARY SPECIFICATION CLOTH, BALLISTIC, NYLON (17 AUG 1977)., This specification covers nylon ballistic cloth having a specified minimum ballistic resistance. Ident. Num: MIL-C-12369 Rev. Num: F MIL-C-12369F, MILITARY SPECIFICATION CLOTH, BALLISTIC, NYLON (28 JUN 1974)., This specification covers nylon ballistic cloth having a specified minimum ballistic resistance. Ident. Num: MIL-C-12423 Rev. Num: C MIL-C-12423C, MILITARY SPECIFICATION CABLE, TELEPHONE WD-33/U (2 NOV 1961)., this specification covers one type of twisted pair cable designated as Cable, Telephone WD-33/U consisting of two 1022 circular mil (No. 20 AWG) coated copper clad steel wires separately insulated with a styrene butadiene rubber (SBR) insulating compound followed by a chloroprene rubber (CR) jacketing compound and twisted together to form the finished cable. Ident. Num: MIL-C-13077 Rev. Num: A MIL-C-13077A, MILITARY SPECIFICATION, CABLE, SPECIAL PURPOSE, ELECTRICAL (CORDAGE CO-212 AND CABLE, SPECIAL PURPOSE, ELECTRICAL WD-32/U) (27 MAY 1971)., This specification covers two types of two-conductor concentric type low voltage power cables, designated as Cordage CO-212; end Cable, Special Purpose, Electrical, WD-32/u. These cables are insulated and jacketed with low temperature (-5 deg C) styrene butadinene rubber (S2R), and rated at 150 volts ac. They are designed for service entrance use. Ident. Num: MIL-C-13294C Rev. Num: C MIL-C-13294C (AMENDMENT 3), MILITARY SPECIFICATION CABLE, TELEPHONE, ELECTRICAL (INFANTRY FIELD WIRE, TWISTED PAIR, WIRE WD-1/TT AND WD-13/TT) (18 DEC 1975)., This amendment forms a part fo Military Specification MIL-C-13294C, 22 November 1966. Ident. Num: MIL-C-13294 Rev. Num: C MIL-C-13294C, MILITARY SPECIFICATION CABLE, TELEPHONE, ELECTRICAL (INFANTRY FIELD WIRE, TWISTED PAIR, WIRE WD-1/TT AND WD-14/TT) (23 NOV 1995)., This specification covers stranded conductor, polyethylene-insulated, nylon-jacketed-or-braided, electrical telephone cable (twisted pair infantry field wire), hereinafter called "field wire". Ident. Num: MIL-C-13486 Rev. Num: C MIL-C-13486C, CABLES, SPECIAL PURPOSE, ELECTRICAL: LOW-TENSION, HEAVY-DUTY, SINGLE CONDUCTOR AND MULTIPLE CONDUCTOR, SHIELDED AND UNSHIELDED, GENERAL SPECIFICATION FOR (6 JUN 1989) [SUPERSEDED BY MIL-DTL-13486E]., This specification covers two types (shielded and unshielded) of insulated, heavy-duty, single and multiconductor, electrical cables for use in low-tension circuits (see 6.1). Ident. Num: MIL-C-13766 Rev. Num: C MIL-C-13766C (ME) (AMENDMENT 1), MILITARY SPECIFICATION, CONVERSION KIT, BARGE, DECK ENCLOSURE DESIGN 7006, FOR DESIGNS 213A AND 7005. (23 JUN 1987)., This amendment forms a part of MIL-C-13766C(ME), dated 14 March 1983 and is approved for use within the USA Belvoir Research, Development, and Engineering Center, Department of the Army and is available for use by all Departments and Agencies of the Department of Defense. Ident. Num: MIL-C-13766 Rev. Num: C MIL-C-13766C, MILITARY SPECIFICATION, CONVERSION KIT, BARGE, DECK ENCLOSURE DESIGN 7006, FOR DESIGNS 213A AND 7005. (14 MAR 1983)., This specification covers the construction of a knockdown, sectionalized, deckhouse kit for covering an existing 110-foot steel deck cargo barge (Design 7005) or a 120-foot steel deck cargo barge (Design 231A) into a covered lighter. Erection tools, welding, burning, and lifting gear are not included in the kit. Ident. Num: MIL-C-13777-6B Rev. Num: B MIL-C-13777-6B, MILITARY SPECIFICATION SHEET CABLE, SPECIAL PURPOSE,ELECTRICAL 60, 65 AND 78 CONDUCTORS (1 SEPT 1966)., The complete requirements for procuring the cable described herein shall consist of this document and the latest issue of Specification MIL-C-13777. Ident. Num: MIL-C-13924 Rev. Num: C MIL-C-13924C (AMENDMENT 1), DETAIL SPECIFICATION COATING, OXIDE, BLACK, FOR FERROUS METALS. This amendment forms a part of Military Specification MIL--13924C, dated 9 June 1980, and is approved for use by all Departments and Agencies of the Department of Defense. Ident. Num: MIL-C-13924 Rev. Num: C MIL-C-13924C, DETAILED SPECIFICATION COATING, OXIDE, BLACK, FOR FERROUS METALS (9 JUN 1980) [S/S BY MIL-DTL-13924D]., This specification covers black oxide coatings applied to ferrous metals (wrought iron, carbon, low alloy, and corrosion resistant steels). Black oxide coatings, with or without a supplementary preservative treatment, may be used where a black surface is required. Only very limited corrosion protection, under mildly corrosive conditions, is obtained as a result of black oxide coating. Ident. Num: MIL-C-14550 Rev. Num: B MIL-C-14550B (AMENDMENT 3), MILITARY SPECIFICATION, COPPER PLATING (ELECTRODEPOSITED) (20 MAR 1987) [S/S BY SAE-AMS2418]., This specification covers electrodeposited copper plating on metal surfaces Ident. Num: MIL-C-14550 Rev. Num: B MIL-C-14550B, MILITARY SPECIFICATION, COPPER PLATING (ELECTRODEPOSITED) (2 DEC 1983) [S/S BY SAE-AMS2418]., This specification covers electrodeposited copper plating on metal surfaces Ident. Num: MIL-C-14613 Rev. Num: A MIL-C-14613A (w/ AMENDMENT 2), MILITARY SPECIFICATION, CHARGER, BOLT, CALIBER .50 BROWNING MACHINE GUN, M10 (6 MAY 2003)., This amendment forms a part of MIL-C-14613A (AR), dated 15 May 1972, and is approved by use the U.S. Army Armament, Research, Development and Engineering Center, and is available for use by all Departments and Agencies of the Department of Defense. Ident. Num: MIL-C-14613 Rev. Num: A MIL-C-14613A, MILITARY SPECIFICATION, CHARGER, BOLT, CALIBER .50 BROWNING MACHINE GUN, M10 (15 MAY 1972)., This specification covers one type of manually operated charger for the Gun, Machine, Browning, Cal. .50, M2 Heavy Barrel, Turret Type. Ident. Num: MIL-C-14806 Rev. Num: A MIL-C-14806A (AMENDMENT 2), MILITARY SPECIFICATION, COATING, REFLECTION REDUCING, FOR INSTRUMENT COVER GLASSES AND LIGHTING WEDGES (1 MAY 1974). Ident. Num: MIL-C-14806 Rev. Num: A MIL-C-14806A, MILITARY SPECIFICATION, COATING, REFLECTION REDUCING, FOR INSTRUMENT COVER GLASSES AND LIGHTING WEDGES (12 JUN 1969)., This specification covers reflection reducing coatings applied to substrate material having indices of refraction within the range of 1.47 to 1.55 to be used as instrument cover glasses and lighting wedges herein referred to as optical elements. Ident. Num: MIL-C–15074 Rev. Num: E MIL-C-15074E, MILITARY SPECIFICATION CORROSION PREVENTIVE, FINGERPRINT REMOVER (30 JAN 1991)., This specification covers one type of corrosion preventive intended for use as a fingerprint remover and as a temporary preservative for metallic items Ident. Num: MIL-C-15179B Rev. Num: B MIL-C-15179B, MILITARY SPECIFICATION, CASTOR OIL, DEHYDRATED (18 JAN 1971)., This specification covers a dehydrated castor oil for paints, varnishes, lubrication, and specialized applications. Ident. Num: MIL-C-15479 Rev. Num: C MIL-C-15479C, MILITARY SPECIFICATION CABLE, POWER, ELECTRICAL, SUBMARINE, NAVY STANDARD HARBOR DEFENSE (17 MAR 1958)., This specification covers standard marine cables for use in harbor defense systems. Ident. Num: MIL-C-16173 Rev. Num: E MIL-C-16173E, PERFORMANCE SPECIFICATION CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION (20 OCT 1966) (S/S BY MIL-PRF-16173D)., This specification covers solvent-dispersed corrosion preventive compounds that deposit thin, easily removable films after evaporation of solvent. Ident. Num: MIL-C-16555 Rev. Num: D MIL-C-16555D, MILITARY SPECIFICATION, COATING COMPOUND, STRIPPABLE, SPRAYABLE (24 FEB 1975)., This specification covers a strippable coating compound for application by spraying on painted or unpainted metal surfaces to seal openings and provide protection against corrosion. This specification meets Air Pollution Regulations (Rule 66). Ident. Num: MIL-C-1690 Rev. Num: D MIL-C-1690D (NOTICE 1), MILITARY SPECIFICATION CASE, SHOTGUN, AMMUNITION, COTTON DUCK (25 JAN 1988)., Military Specification MIL-C-1690D dated 10 December 1970, has been reviewed and determined to be current. Ident. Num: MIL-C-1690 Rev. Num: D MIL-C-1690D (NOTICE 2), MILITARY SPECIFICATION CASE, SHOTGUN, AMMUNITION, COTTON DUCK (2 AUG 2000)., MIL-C-1690D dated 10 December 1970, is hereby canceled. Future acquisitions for this item should refer to A-A-59522, Case, Shotgun, Ammunition, Cotton Duck. Ident. Num: MIL-C-1690 Rev. Num: D MIL-C-1690D, MILITARY SPECIFICATION CASE, SHOTGUN, AMMUNITION, COTTON DUCK (10 DEC 1970)., This specification covers one type and size shotgun ammunition case, made of cotton duck, with compartments for 12 shotgun sheels. Loops are provided for attachment to a belt. Ident. Num: MIL-C-17 Rev. Num: F MIL-C-17/75F (NOTICE 1), DETAIL SPECIFICATION SHEET, CABLE, RADIO FREQUENCY FLEXIBLE COAXIAL 50 OHMS M17/75-RG214 AND M17/75-RG365 (16 APR 2003)., MIL-C-17/75F, dated 25 June 1998, has been reviewed and determined to be valid for use in acquisition. Ident. Num: MIL-C-17711 Rev. Num: B MIL-C-17711B, MILITARY SPECIFICATION COATINGS, CHROMATE, FOR ZINC ALLOY CASTINGS AND HOT DIP GALVANIZED SURFACES (14 MAY 1974)., This specification covers chromate coatings for use with zinc base alloy cast surfaces and hot-dip galvanized surfaces. Ident. Num: MIL-C-17711 Rev. Num: B MIL-C-17711B, MILITARY SPECIFICATION, COATINGS, CHROMATE, FOR ZINC ALLOY CASTINGS AND HOT DIP GALVANIZED SURFACES (14 MAY 1974)., This specification covers chromate coatings for use with zinc base alloy cast surfaces and hot-dip galvanized surfaces. Ident. Num: MIL-C-17 Rev. Num: G MIL-C-17G, MILITARY SPECIFICATION, CABLES, RADIO FREQUENCY, FLEXIBLE AND SEMIRIGID, GENERATION SPECIFICATION FOR (9 MAR 1990)., This specification covers flexible and semirigid cables with solid and semisolid dielectric cores, with single, dual and twin inner conductors. Cables covered by this specification are primarily intended for use as transmission lines to conduct energy in a simple power transfer continuously or intermittently. In general, these cables are designed for low-loss, stable operation from the relatively low frequencies through the higher frequencies in the microwave and radar regions of the frequency spectrum. Cables may also be used as circuit elements, delay lines or impedance matching devices. These cables are supplied under a reliability assurance program as specified in section 3. Ident. Num: MIL-C-18087 Rev. Num: A MIL-C-18087A (SH), MILITARY SPECIFICATION CLUTCHES FOR PROPULSION UNITS AND AUXILIARY MACHINERY, NAVAL SHIPBOARD (15 AUG 1991)., This specification covers clutches for Naval shipboard propulsion units and auxiliary machinery. This specification does not include all types of clutches but is intended to cover those types most widely used in shipboard propulsion and auxiliary systems. Ident. Num: MIL-C-18244 Rev. Num: - MIL-C-18244, CONTROL AND STABILIZATION SYSTEMS: AUTOMATIC, PILOTED AIRCRAFT, GENERAL SPECIFICATION FOR (1 DEC 1962)., This specification covers design. test and performance requirements for either GFE or CFE automatic control and stabilization systems for all U.S. Navy piloted aircraft. In the event of conflict between this specification and other referenced documents the requirements of this specification shall govern. The detail requirements for a particular system shall be as specified in the detailed specification, contract or purchase order for that system. (See 6.2). Ident. Num: MIL-C-18244 Rev. Num: A MIL-C-18244A (AS) (AMENDMENT 1), MILITARY SPECIFICATION, CONTROL AND STABILIZATION SYSTEMS: AUTOMATIC, PILOTED AIRCRAFT, GENERAL SPECIFICATION FOR (18 AUG 1993)., This amendment forms a part of MIL-C-18244A(AS), dated 1 December 1962, and is approved for use by the Naval Air Systems Command, Department of the Navy and is available for use by all Departments and Agencies of the Department of Defense. Ident. Num: MIL-C-18244 Rev. Num: A MIL-C-18244A(WEP), MILITARY SPECIFICATION, CONTROL AND STABILIZATION SYSTEMS: AUTOMATIC, PILOTED AIRCRAFT, GENERAL SPECIFICATION FOR (1 DEC 1962)., This specification covers design. test and performance requirements for either GFE or CFE automatic control and stabilization systems for all U.S. Navy piloted aircraft. In the event of conflict between this specification and other referenced documents the requirements of this specification shall govern. The detail requirements for a particular system shall be as specified in the detailed specification, contract or purchase order for that system. (See 6.2) Ident. Num: MIL-C-18760 MIL-C-18760, MILITARY SPECIFICATION, CARTRIDGE CASE, BRASS 8-INCH MARK 1 MOD 3 (55 CALIBER) (29 JUN 1955)., This specification covers the detail requirements for the 8-inch Mark 1 Mod 3 (55 caliber) brass cartridge case. Ident. Num: MIL-C-18821 Rev. Num: - MIL-C-18821, MILITARY SPECIFICATION, CARTRIDGE CASES, BRASS 5-INCH (38 CALIBER) (18 SEP 1990)., This specification covers the detail requirements for 5-inch (38 Caliber) brass cartridge cases. Ident. Num: MIL-C-19002 Rev. Num: D MIL-C-19002D, MILITARY SPECIFICATION, CLOTH, COATED, AND STRIP, COATED CLOTH - POLYCHLOROPRENE ON NYLON (30 JUN 1985)., The specification covers the requirements for nylon base polychloroprene coated cloth and coated cloth strip for use in the manufacture of pneumatic life preservers and waterproof garments Ident. Num: MIL-C-1911 Rev. Num: J MIL-C-1911J (AMENDMENT 1), MILITARY SPECIFICATION, CAP, CAMOUFLAGE PATTERN (8 MAR 1990) [S/S BY A-55212]. Ident. Num: MIL-C-1911 Rev. Num: J MIL-C-1911J, MILITARY SPECIFICATION, CAP, CAMOUFLAGE PATTERN (9 FEB 1988) [S/S BY A-55212]., This document covers a cap made from cotton and nylon with flannel lined earflaps. Ident. Num: MIL-C-19713 Rev. Num: B MIL-C-19713B, MILITARY SPECIFICATION, COOLERS, FLUID, BLEED AIR, GAS TURBINE, NAVAL SHIPBOARD (14 FEB 1992)., This specification covers after air coolers for bleed air from gas turbine engines for Naval shipboard application. Only one classification of coolers is covered by this specification. Ident. Num: MIL-C-20218 Rev. Num: F MIL-C-20218F, MILITARY SPECIFICATION, CHROMIUM PLATING, ELECTRO-DEPOSITED, POROUS (13 NOV 1984)., This specification covers porous, electro-deposited chromium plating applied to surfaces where a lubricating film must be sustained such as cylinder bores. Ident. Num: MIL-C-20709 Rev. Num: D MIL-C-20709D, MILITARY SPECIFICATION, CASEWORK, METAL AND WOOD (MEDICAL AND DENTAL) (14 MAY 1984) [S/S BY AA-C-2929]., This specification covers casework for medical and dental facilities. Ident. Num: MIL-C-21318 Rev. Num: C MIL-C-21318C, MILITARY SPECIFICATION CLOTH, BEDFORD, CORD (23 OCT 1987)., This specification covers the requirements for an aircraft upholstery ribbed nylon cloth. Ident. Num: MIL-C-21768 Rev. Num: A MIL-C-21768A, MILITARY SPECIFICATION, COPPER ALLOY NUMBERS 210 (GILDING 95%) AND 220 (COMMERCIAL BRONZE, 90%) SHEET AND STRIP (21 JUN 1971) [S/S BY ASTM-B36]., This specification covers copper alloy numbers 210 and 220 in sheet and strip form. Ident. Num: MIL-C-22263 Rev. Num: B MIL-C-22263B, MILITARY SPECIFICATION COUPLING FUEL LINE, FLEXIBLE, 125 PS1, GENERAL SPECIFICATION FOR (28 JUN 1972)., This specification covers flexible couplings for joining tubing in aircraft fuel systems. Ident. Num: MIL-C-22395 Rev. Num: B MIL-C-22395B (NOTICE 1), MILITARY SPECIFICATION, COMPOUND, END SEALING, THERMAL INSULATION PIPE COVERING-FIRE-, WATER-, AND WEATHER-RESISTANT (25 JUL 1989)., MIL-C-22395B, dated 9 December 1980, has been reviewed and determined to be valid for use in acquisition. Ident. Num: MIL-C-22395 Rev. Num: B MIL-C-22395B, MILITARY SPECIFICATION, COMPOUND, END SEALING, THERMAL INSULATION PIPE COVERING-FIRE-, WATER-, AND WEATHER-RESISTANT (29 AUG 1963)., This specification covers flexible, fire resitant and water-proof and sealing compounds for thermal insulation exterior steam systems operating at temperatures up to 400o F. Ident. Num: MIL-C-22587 Rev. Num: B MIL-C-22587B, MILITARY SPECIFICATION, CARTRIDGE, GREASE, 14 OUNCE (FOR CARTRIDGE-TYPE GREASE GUN) (15 FEB 1962) [S/S BY SAE-AMS-C-22587]., This specification covers 14 ounce capacity grease cartridges. They are designed for use with cartridge-type grease guns conforming to MIL-G-3859. Ident. Num: MIL-C-22750 Rev. Num: E MIL-C-22750E, MILITARY SPECIFICATION COATING, EPOXY, HIGH-SOLIDS (31 JUL 1989)., This specification covers the requirements for a two component, high solids epoxy coating with a maximum volatile organic compound (VOC) content of 340 grams/liter (g/l) (2.8 pounds/gallon (lbs/gal)). The coating is supplied as a kit. Ident. Num: MIL-C-22931 Rev. Num: - MIL-C-22931/13A (NOTICE 1), DETAIL SPECIFICATION SHEET CABLE, RADIO FREQUENCY, SEMIRIGID, COAXIAL, SEMI-AIR-DIELECTRIC, 1.625 TO 1.830 INCHES OUTSIDE DIAMETER, 50 OHMS (1 MAY 2003)., MIL-C-22931/13A, dated 20 January 1972, has been reviewed and determined to be valid for use in acquisition Ident. Num: MIL-C-22992 Rev. Num: E MIL-C-22992E (SUPPLEMENT 1), DETAIL SPECIFICATION CONNECTORS, PLUGS AND RECEPTACLES, ELECTRICAL, WATERPROOF, QUICK DISCONNECT, HEAVY DUTY TYPE, GENERAL SPECIFICATION FOR (28 AUG 1974) [S/S BY MIL-DTL-22992F). Ident. Num: MIL-C-22992 Rev. Num: E MIL-C-22992E, DETAIL SPECIFICATION CONNECTORS, PLUGS AND RECEPTACLES, ELECTRICAL, WATERPROOF, QUICK DISCONNECT, HEAVY DUTY TYPE, GENERAL SPECIFICATION FOR (28 AUG 1974) [S/S BY MIL-DTL-22992F)., This specification covers multi-contact, heavy duty, quick disconnect, waterproof, electrical plug and receptacle connectors and associated accessories for electronic and electrical power and control circuits. Connectors are rated for -55°C to +125°C (see 6.1). Ident. Num: MIL-C-23217 Rev. Num: B MIL-C-23217, MILITARY SPECIFICATION, COATING, ALUMINUM, VACUUM DEPOSITED (ASG) (25 AUG 1969)., This specification covers vacuum-deposited aluminum coatings. Ident. Num: MIL-C-24066 Rev. Num: C MIL-C-24066C, MILITARY SPECIFICATION, CLIP, COMPONENT, NON-ELECTRICAL, GENERAL SPECIFICATION FOR (6 JUL 1992) [S/S BY NAS1463]., This specification covers the general requirements for non-electrical component clips designed to hold miscellaneous electronic component parts. Ident. Num: MIL-C-24231 Rev. Num: D MIL-C-24231D (SH), CONNECTORS, PLUGS, RECEPTACLES, ADAPTERS, HULL INSERTS, AND HULL INSERT PLUGS, PRESSURE-PROOF, GENERAL SPECIFICATION FOR (15 MAY 1987)., This specification covers pressure-proof single and multiple cable connectors, plugs, receptacles, adapters, hull inserts, and hull insert plugs. Ident. Num: MIL-C-24231 Rev. Num: D MIL-C-24231D(AMENDMENT 1), MILITARY SPECIFICATION, CONNECTORS, PLUGS, RECEPTACLES, ADAPTERS, HULL INSERTS, AND HULL INSERT PLUGS, PRESSURE-PROOF, GENERAL SPECIFICATION FOR (7 AUG 1989). Ident. Num: MIL-C-24231 Rev. Num: D MIL-C-24231D(SUPPLEMENT 1), MILITARY SPECIFICATION, CONNECTORS, PLUGS, RECEPTACLES, ADAPTERS, HULL INSERTS, AND HULL INSERT PLUGS, PRESSURE-PROOF, GENERAL SPECIFICATION FOR (15 MAY 1987)., This specification covers pressure-proof single and multiple cable connectors, plugs, receptacles, adapters, hull inserts, and hull insert plugs. Ident. Num: MIL-C-24308 Rev. Num: C MIL-C-24308C, PERFORMANCE SPECIFICATION SPECIFICATION CONNECTORS, ELECTRIC, RECTANGULAR, NONENVIRONMENTAL, MINIATURE, POLARIZED SHELL, RACK AND PANEL, GENERAL SPECIFICATION FOR (26 JAN 1989)., This specification covers the performance requirements for nonenvironmental, polarized shell, miniature, rack and panel connectors having pin and socket, crimp (removable), solder (nonremovable), or insulation displacement (nonremovable) contacts with rigid or float mounting, designed for -55EC to +125EC operating temperature. Ident. Num: MIL-C-24449 Rev. Num: A MIL-C-24449A, MILITARY SPECIFICATION, CAST POLYMETHYL METHACRYLATE FOR SHEET STOCK, CUSTOM CASTINGS, AND FINISHED WINDOWS (3 AUG 1981)., This specification covers polymerized methyl methacrylate sheet stock, custom castings, and windows of optical quality for service in pressure vessels for human occupancy. Ident. Num: MIL-C-24615 Rev. Num: A MIL-C-24615A, MILITARY SPECIFICATION, CASTINGS, NICKEL-CHROMIUM-MOLYBDENUM-COLUMBIUM ALLOY (14 OCT 1988)., This specification covers nickel-chromium-molybdenum-columbium (Ni-CR-Mo-Cb) (UNS N06625) alloy castings for corrosion-resistant service. Ident. Num: MIL-C-24707 Rev. Num: - MIL-C-24707 (SUPPLEMENT 1), MILITARY SPECIFICATION, CASTINGS, FERROUS, GENERAL SPECIFICATION FOR (27 JAN 1989). Ident. Num: MIL-C-24707 Rev. Num: - MIL-C-24707, MILITARY SPECIFICATION, CASTINGS, FERROUS, GENERAL SPECIFICATION FOR (27 JAN 1989)., This specification covers the general requirements for carbon, alloy and corrosion resisting steel castings. Ident. Num: MIL-C-24758 Rev. Num: C MIL-C-24758C, MILITARY SPECIFICATION CONDUIT SYSTEMS, FLEXIBLE, WEATHERPROOF (5 AUG 1991)., This specification covers the general requirements for flexible, weatherproof conduit and associated fittings primarily for use in external areas on U.S. Navy Ship's to shield cables against electromagnetic (EM) radiation from own-ship transmitters and from an electromagnetic pulse (EMP). Ident. Num: MIL-C-24929A MIL-C-24929A (AMENDMENT 1), MILITARY SPECIFICATION, CLOTH, LAMINATED, ALUMINIZED (PARA-ARAMID BASE) (4 JAN 1993). Ident. Num: MIL-C-24929 Rev. Num: A MIL-C-24929A, MILITARY SPECIFICATION, CLOTH, LAMINATED, ALUMINIZED (PARA-ARAMID BASE) (30 SEP 1988)., This specification covers the requirements for knitted. aluminized, para-aramid fabrics. Ident. Num: MIL-C-24931 MIL-C-24931, MILITARY SPECIFICATION CLOTH, PLAIN WEAVE, ARAMID, WATER REPELLENT (15 JUL 1987)., This specification covers the requirements for a plain weave aramid cloth that is water repellent treated. Ident. Num: MIL-C-24939 MIL-C-24939, MILTARY SPECIFICATION CLOTH, RIPSTOP, PARA-ARAMID/PBI, WATER REPELLENT (30 SEPT 1988)., This specification covers the requirements for a plain 2x2 repstop, 60% para-aramid and 40% PBI, cloth taht is water repellent treated. Ident. Num: MIL-C-24941 MIL-C-24941, MILITARY SPECIFICATION CLOTH, LAMINATED, ALUMINIZED (PARA-ARAMID/PBI BASE) (30 SEPT 1988)., This specification covers the requirements for a lightweight knitted, aluminized, para-aramid/PBI blend fabric. Ident. Num: MIL-C-25050 Rev. Num: A MIL-C-25050A (AMENDMENT 4), MILITARY SPECIFICATION, COLORS, AERONAUTICAL LIGHTS AND LIGHTING EQUIPMENT, GENERAL SPECIFICATION FOR (30 MAR 1989) [S/S BY SAE-AS25050]. Ident. Num: MIL-C-25050 Rev. Num: A MIL-C-25050A (NOTICE 2), MILITARY SPECIFICATION COLORS, AERONAUTICAL LIGHTS AND LIGHTING EQUIPMENT, GENERAL REQUIREMENTS FOR (13 SEP 1999)., MIL-C-25050A(2) dated 30 March 1989, is hereby canceled. Future acquisition for this item should refer to SAE-AS25050, ?Colors, Aeronautical Lights and Lighting Equipment, General Requirements For.? Ident. Num: MIL-C-25050 Rev. Num: A MIL-C-25050A, MILITARY SPECIFICATION, COLORS, AERONAUTICAL LIGHTS AND LIGHTING EQUIPMENT, GENERAL SPECIFICATION FOR (2 DEC 1963) [S/S BY SAE-AS25050]., This specification covers the chromaticity and transmission requirements of equipment light transmitting ware in the descending order of transmission. Ident. Num: MIL-C-26074 Rev. Num: C MIL-C-26074C (AMENDMENT 1), MILITARY SPECIFICATION COATINGS, ELECTROLESS NICKEL REQUIREMENTS FOR. This amendment forms a part of military specification MIL-C-26074C, dated 3 May 1985. and is approved for use by all Department and agencies of the Department of Defense. Ident. Num: MIL-C-26074 Rev. Num: D MIL-C-26074D, COATINGS, MILITARY SPECIFICATION ELECTROLESS NICKEL, REQUIREMENTS FOR. This specification covers the requirements for electroless (autocatalytic chemical reduction) deposition of nickel or nickel coatings on metal surfaces. Ident. Num: MIL-C-26074 Rev. Num: E MIL-C-26074E (SH) (NOTICE 1), COATINGS, MILITARY SPECIFICATION ELECTROLESS NICKEL, REQUIREMENTS FOR. MIL-C-26074E, dated October 1990,is hereby canceled. Ident. Num: MIL-C-26074 Rev. Num: E MIL-C-26074E (SH) (NOTICE 3), COATINGS, MILITARY SPECIFICATION ELECTROLESS NICKEL, REQUIREMENTS FOR. MIL-C-26074E, dated 30 October 1990, is hereby reinstated by the Naval Sea Systems Command, Department of the Navy, and maybe used for acquisition. Ident. Num: MIL-C-2607 Rev. Num: E MIL-C-2607E, (NOTICE 2) MILITARY SPECIFICATION COATINGS, ELECTROLESS NICKEL REQUIREMENTS FOR. MIL-C-2607E, Dated 30 October 1990, is hereby cancelled. Ident. Num: MIL-C-26074 Rev. Num: E MIL-C-2607E, MILITARY SPECIFICATION COATINGS, ELECTROLESS NICKEL REQUIREMENTS FOR. This specification covers the requirements for electroless (autocatalytic chemical reduction) deposition of nickel-phosphorous alloy coatings on metal and composite surfaces. Ident. Num: MIL-C-27487 Rev. Num: G MIL-C-27487G, MILITARY SPECIFICATION COUPLING HALVES, QUICK-DISCONNECT, CAM-LOCKING TYPE (19 SEP 1986) (S/S BY A-A-59326)., This specification covers cam-locking type, quick-disconnect coupling halves. Ident. Num: MIL-C-27505 Rev. Num: B MIL-C-27505B (USA), MILITARY SPECIFICATION CARTRIDGE, ENGINE STARTER MXU-4A/A (15 JUN 1967)., This specification covers the requirements for one type of solid propellant engine starter cartridge, designated MXU-4A/A. Ident. Num: MIL-C-28981 Rev. Num: - MIL-C-28981, MILITARY SPECIF CATION, CASE, SMALL ARMS AMMUNITION, 30 ROUND MAGAZINE M-16 RIFLE (31 JAN 1972)., This specification covers the requirements for one type and size ammunition case used as a unit of the lightweight individual clothing and load carrying equipment. Ident. Num: MIL-C-29106 Rev. Num: B MIL-C-29106B, MILITARY SPECIFICATION, COAT, MAN'S, WOOL, WINTER (1 MAR 1982)., This specification covers the requirements for a double breasted dress coat constructed of 15 ounce blue wool serge cloth. Ident. Num: MIL-C-29184 Rev. Num: B MIL-C-29184B (NOTICE 3), DETAIL SPECIFICATION, CABLE ASSEMBLIES, POWER, ELECTRICAL, FOR PORTABLE PANELBOARDS, GENERAL SPECIFICATION FOR (17 NOV 2006), MIL-C-29184B, dated 16 April 2001, remains inactive for new design; however, the document is valid for use. Ident. Num: MIL-C-29240 Rev. Num: - MIL-C-29240 (NOTICE 1), MILITARY SPECIFICATION, PERFORMANCE SPECIFICATIONS FOR CASEWORK, MOVEABLE AND MODULAR FOR HOSPITAL LABORATORIES AND PHARMACIES (1 APR 1991)., MIL-C-29240, dated 10 May 1985, has been reviewed and determined to be valid for use in acquisition. Ident. Num: MIL-C-29240 Rev. Num: - MIL-C-29240, MILITARY SPECIFICATION, CASEWORK, MOVEABLE AND MODULAR, FOR HOSPITAL LABORATORIES AND PHARMACIES, PERFORMANCE SPECIFICATIONS FOR (10 MAY 1985)., This performance specification covers modular, moveable casework configuration for hospital laboratories and pharmacies. Ident. Num: MIL-C-29475 Rev. Num: - MIL-C-29475 (MC), MILITARY SPECIFICATION, COATING, WATER BORNE POLYURETHANE CAMOUFLAGE (7 JUL 1994)., This specification covers the requirements of a camouflage, chemical agent resistant, reduced volatile organic compound (VOC) water reducible polyurethane coating, for use as a finished coat on military equipment. Ident. Num: MIL-C-320 Rev. Num: C MIL-C-320C (NOTICE 1), CONCERTINA, BARBED WIRE (29 JUL 1985) [S/S BY MIL-B-52775]. Ident. Num: MIL-C-3301 Rev. Num: C MIL-C-3301C, MILITARY SPECIFICATION COMPOUND, ASPHALTIC, HOT MELT (CAVITY LINING) (15 SEP 1970)., This specification covers a hot-melt asphaltic compound for coating the inner walls of metal cases prior to filling with explosives. Ident. Num: MIL-C-3432 Rev. Num: F MIL-C-3432F, DETAIL SPECIFICATION CABLES, (POWER AND SPECIAL PURPOSE) AND WIRE, ELECTRICAL (300 AND 600 VOLTS) (2 NOV 1992) [S/S BY MIL-DTL-3432G]., This specification covers single and multiple conductor cables with and without shields for use in 300 and 600 volts root mean square (rms) applications (see 6.1). Ident. Num: MIL-C-3727 Rev. Num: F MIL-C-3727F, MILITARY SPECIFICATION CLOTH, BARATHEA, WOOL (18 DEC 1987)., This document covers wool barathea cloth. Ident. Num: MIL-C-3884 Rev. Num: A MIL-C-3884A, MILITARY SPECIFICATION CORD, ELECTRICAL (SHORT LAY) (5 NOV 1970)., This specification covers 2-, 3-, and 4-conductor, extra flexible electrical cords in which all conductors under the same jacket are of the same AWG wire size. The cord insulation is styrene butadiene rubber (SBR), and the jacket is SBR or polychloroprene. These cords are suitable at low temperatures (-55c), and are for use in applications where severe flexing is a major consideration. Ident. Num: MIL-C-3884 Rev. Num: B MIL-C-3884B (AMENDMENT 1), MILITARY SPECIFICATION CORD, ELECTRICAL (SHORT LAY) (30 NOV 2002). Ident. Num: MIL-C-3884 Rev. Num: B MIL-C-3884B, MILITARY SPECIFICATION CORD, ELECTRICAL (SHORT LAY) (26 JUN 1990)., This specification covers 2-, 3-, and 4-conductor, extra flexible electrical cord in which all conductors under the same jacket are of the same AWG wire size. The cord insulation is styrene butadiene rubber (SBR), and the jacket is SBR. These cords are suitable at low temperature (-55c), and are for use in applications where severe flexing is a major consideration. Ident. Num: MIL-C-3885 Rev. Num: F MIL-C-3885F, MILITARY SPECIFICATION CABLE ASSEMBLIES AND CORD ASSEMBLIES, ELECTRICAL (4 DEC 1985)., This specification covers the minimum requirements unless otherwise specified for cable and cord assemblies(referred to as cable assemblies), except for radio frequency coaxial cable assemblies. Ident. Num: MIL-C-38999 Rev. Num: J MIL-C-38999J (SUPPLEMENT 1), MILITARY SPECIFICATION, CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET, THREADED, AND BREECH COUPLING), ENVIRONMENT RESISTANT, REMOVABLE CRIMP AND HERMETIC SOLDER CONTACTS, GENERAL SPECIFICATION FOR (20 JUN 1990) [S/S BY MIL-DTL-38999]. Ident. Num: MIL-C-38999 Rev. Num: J MIL-C-38999J, MILITARY SPECIFICATION, CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET, THREADED, AND BREECH COUPLING), ENVIRONMENT RESISTANT, REMOVABLE CRIMP AND HERMETIC SOLDER CONTACTS, GENERAL SPECIFICATION FOR (6 APR 1990) [S/S BY MIL-DTL-38999]., This specification covers four series of miniature, high density bayonet, threaded, or breech coupling, circular, environment resistant, electrical connectors using removable crimp or fixed hermetic solder contacts, and are capable of operation within a temperature range of -65 deg C to +200 deg C. Ident. Num: MIL-C-32029 Rev. Num: D MIL-C-39029D (SUPPLEMENT 1A, MILITARY SPECIFICATION CONTACTS, ELECTRICAL CONNECTOR, GENERAL SPECIFICATION FOR (2 MAY 1988) (S/S BY SAE-AS39029)., This supplement forms a part of Military Specification MIL-C-3902D, dated 02 May 1988. Ident. Num: MIL-C-32029 Rev. Num: D MIL-C-39029D, MILITARY SPECIFICATION CONTACTS, ELECTRICAL CONNECTOR, GENERAL SPECIFICATION FOR (2 MAY 1988) (S/S BY SAE-AS39029)., This specification covers the general requirements for removable crimp, solderless wrap, and solder type electrical contacts for use in connectors and other electric and electronic components. Ident. Num: IL-C-3998 Rev. Num: E MIL-C-3998E, MILITARY SPECIFICATION, CRANE TRUCKS, WAREHOUSE, DIESEL ENGINE, PNEUMATIC RUBBER TIRES (31 MAR 1994)., This specification covers diesel-engine-driven, wheel mounted, self-propelled, rotating and telescoping boom, warehouse and industrial handling cranes. Ident. Num: MIL-C-40088 Rev. Num: A MIL-C-40088A (AMENDMENT 1), MILITARY SPECIFICATION, CORD, ACRYLIC, LACING (8 MAR 1984). Ident. Num: MIL-C-40088 Rev. Num: A MIL-C-40088A, MILITARY SPECIFICATION, CORD, ACRYLIC, LACING (15 AUG 1977)., This specification covers acrylic lacing cord for use in the assembly of propelling charges Ident. Num: MIL-C-40602 Rev. Num: B MIL-C-40602B(GL) (NOTICE 2), MILITARY SPECIFICATION, COOKIE CUTTING MACHINE, ELECTRIC (22 OCT 1979), Military Specification MIL-C-40602B(GL), dated 29 December 1967, is hereby reinstated and may be used in procurement. MIL-C-4109F (AMENDMENT 1), MILITARY SPECIFICATION, COUPLING HALVES, LOW PRESSURE, AIR HOSE, QUICK-DISCONNECT (29 JUN 1992) [S/S BY A-A-59439]. Ident. Num: MIL-C-4109 Rev. Num: F MIL-C-4109F, MILITARY SPECIFICATION, COUPLING HALVES, LOW PRESSURE, AIR HOSE, QUICK-DISCONNECT (31 OCT 1986) [S/S BY A-A-59439]., This specification covers quick-disconnect coupling halves designed to operate at pressure up to 150 psi, for use with all hose and portable pneumatic tools. Ident. Num: MIL-C-4150 Rev. Num: J MIL-C-4150J, MILITARY SPECIFICATION CASES, TRANSIT AND STORAGE, WATERPROOF AND WATER-VAPORPROOF (29 NOV 1989)., This specification establishes the requirements for rigid, reusable, fire retardant, waterproof and water-vaporproof, rectangular cases manufactured from ferrous or non-ferrous metals or non-metallic matierals. Ident. Num: MIL-C-43086 Rev. Num: C MIL-C-43086C, MILITARY SPECIFICATION, CLOTH, COATED, NYLON, VINYL COATED (FOR AIR SUPPORTED SHELTERS) (28 SEP 1983)., This document covers the requirements for vinyl coated cloth to be used in the fabrication of air-supported shelters. Ident. Num: MIL-C-4339 Rev. Num: D MIL-C-4339D, MILITARY SPECIFICATION CORROSION PREVENTIVE, SOLUBLE OIL FOR WATER INJECTION SYSTEMS (19 JUL 1990)., This specification covers the requirements for one type of corrosion preventive soluble oil used in water-alcohol mixtures. these water-alcohol mixtures are used as thrust augmentation in certain jet aircraft engines and as anti-detonation or internal coolant fluids in certain reciprocation aircraft engines. Ident. Num: MIL-C-43410 Rev. Num: C MIL-C-43410C, MILITARY SPECIFICATION, CLOTH, COATED; POLYESTER/COTTON, POLYESTER/RAYON; POLYVINYL CHLORIDE OR POLYCHLOROPRENE COATED (28 JUN 1989)., This specification covers polyvinyl chloride or polychloroprene coated cloth to be used in the fabrication of fireman's coats and trousers. Ident. Num: MIL-C-43468 Rev. Num: H MIL-C-43468H, MILITARY SPECIFICATION, CLOTH, CAMOUFLAGE PATTERN, WIND RESISTANT POPLIN, COTTON (31 MAR 1992)., This specification covers wind resistant cotton poplin cloth, dyed and overprinted with the specified camouflage pattern. Ident. Num: MIL-C-43734 Rev. Num: D MIL-C-43734D, MILITARY SPECIFICATION, CLOTH, DUCK, TEXTURED NYLON (20 AUG 1987)., This document covers five classes of textured nylon duck cloth. Ident. Num: MIL-C-43774 Rev. Num: C MIL-C-43774C, MILITARY SPECIFICATION CLOTH, PLAIN OR PAJAMA CHECK WEAVE, ARAMID (20 APR 1989)., This specification covers aramid, plain or pajama check weave, cloth. Ident. Num: MIL-C-43800 Rev. Num: A MIL-C-43800A, MILITARY SPECIFICATION, COVERS, PROTECTIVE, AIRDROP HARDWARE AND EQUIPMENT, GENERAL SPECIFICATION FOR (4 NOV 1983)., This document covers miscellaneous protective covers employed in airdrop applications. Ident. Num: MIL-C-43827 Rev. Num: D MIL-C-43827D, MILITARY SPECIFICATION, CASE, SMALL ARMS AMMUNITION, 30-ROUND MAGAZINE (M-16 RIFLE), LC-1 (30 MAR 1990)., This specification covers one type and size of ammunition case, fabricated from Olive Green nylon duck, webbing, and tape, with miscellaneous metallic hardware and plastic flap closure. Ident. Num: MIL-C-43842 Rev. Num: C MIL-C-43842C, MILITARY SPECIFICATION CLOTH, OXFORD, ARAMID (11 JUN 1992)., This specification covers flame resistant aramid oxford cloth. Ident. Num: MIL-C-43989 Rev. Num: A MIL-C-43989A, MILITARY SPECIFICATION CLOTH, KNITTED, RASHEL, ARAMID (19 SEPT 1986)., This document covers one type of raschel knitted aramid cloth. Ident. Num: MIL-C-44014 Rev. Num: - MIL-C-44014, MILITARY SPECIFICATION, CLOTH, CAMOUFLAGE PATTERN, DUCK, COTTON, (17 SEP 1979)., This specification covers one type of cloth, duck cotton, dyed and printed with organic colors to the prescribed 4-color U.S. Army Pattern (Camouflage). Ident. Num: MIL-C-44031 Rev. Num: D MIL-C-44031D, MILITARY SPECIFICATION, CLOTH, CAMOUFLAGE PATTERN: WOODLAND, COTTON AND NYLON (22 AUG 1989)., This specification covers blended cotton and nylon twill cloth which is dyed and overprinted with a 4-color camouflage print. Ident. Num: MIL-C-44034 Rev. Num: D MIL-C-44034D, MILITARY SPECIFICATION, CLOTH, TWILL, CAMOUFLAGE PATTERN, COTTON AND NYLON FOR DESERT UNIFORM (31 MAR 1992)., This specification covers blended cotton and nylon twill cloth which is dyed and overprinted with the prescribed camouflage print. Ident. Num: MIL-C-44048 Rev. Num: G MIL-C-44048G, DETAIL SPECIFICATION, COATS, CAMOUFLAGE PATTERN, COMBAT (30 NOV 2000) [S/S BY MIL-DTL-44048H]., This document covers the requirements for camouflage pattern, single-breasted combat coats. Ident. Num: MIL-C-44050 Rev. Num: A MIL-C-44050A, MILITARY SPECIFICATION CLOTH, BALLISTIC, ARAMID (18 AUG 1987)., This document covers untreated and water-repellent treated aramid ballistic cloth. MIL-C-44082A, MILITARY SPECIFICATION, CASE, SMALL ARMS, AMMUNITION, 200-ROUND MAGAZINE (16 FEB 1990) Ident. Num: MIL-C-44082 Rev. Num: A MIL-C-44082A, MILITARY SPECIFICATION, CASE, SMALL ARMS, AMMUNITION, 200-ROUND MAGAZINE (16 FEB 1990)., This specification covers one type and size of ammunition case, fabricated from olive green nylon duck, webbing and tape, with miscellaneous hardware. Ident. Num: MIL-C-44187 Rev. Num: C MIL-C-44187C (NOTICE 1), MILITARY SPECIFICATION CLOTH, LAMINATED, WATERPROOF AND MOISTURE VAPOR PERMEABLE (13 SEP 2006)., [S/S by MIL-DTL-31011]., MIL-C-44187C, dated 22 November 1993, is hereby canceled. Future acquisitions for this item may refer to MIL-DTL-31011 Cloth, Waterproof and Moisture Vapor Permeable. Users are cautioned to evaluate replacements for their particular application. Ident. Num: MIL-C-44187 Rev. Num: C MIL-C-44187C, MILITARY SPECIFICATION CLOTH, LAMINATED, WATERPROOF AND MOISTURE VAPOR PERMEABLE (22 NOV 1993)., [S/S by MIL-DTL-31011]., This document covers a three-layered laminated cloth which is waterproof and moisture vapor permeable. Ident. Num: MIL-C-44211 Rev. Num: A MIL-C-44211A, MILITARY SPECIFICATION COATS, MEN'S, TROPICAL AND SERGE, POLYESTER/WOOL, ARMY GREEN 344, FUSIBLE (5 OCT 1989)., This specification covers a polyester/wool tropical worsted coat, and a polyester and wool serge coat. Ident. Num: MIL-C-44219 MIL-C-44219, MILITARY SPECIFICATION CARRIER, CANTEEN, COLLAPSIBLE, 5-QUART CAPACITY (28 JAN 1986)., this document covers the requirements for one type and size of carrier for a 5-quart collapsible canteen. Ident. Num: MIL-C-44223 MIL-C-44223, MILITARY SPECIFICATION COVER; PROTECTIVE, MINE DISPENSER (5 MAY 1986)., This document covers a protective dust cover for use with the XM-138 (Flipper) mine dispenser. Ident. Num: MIL-C-44236 MIL-C-44236, MILITARY SPECIFICATION CLOTH, KNITTED, ARAMID, BI-PLY (27 AUG 1986)., This document covers a knitted aramid bi-ply cloth. Ident. Num: MIL-C-44263 Rev. Num: - MIL-C-44263, MILITARY SPECIFICATION CLOTH, LAMINATED, WATERPROOF, MOISTURE VAPOR PERMEABLE AND FLAME RESISTANT (30 DEC 1986)., This document covers one type of two layer laminated cloth which is waterproof, moisture vapor permeable and flame resistant. Ident. Num: MIL-C-44269 Rev. Num: B MIL-C-44269B, MILITARY SPECIFICATION CHERRY DESSERT, TRAY PACK (30 JUNE 1991)., This specification covers cherry dessert in tray pack cans for use by the Department of Defense as a component of operational rations. MIL-C-44270, MILITARY SPECIFICATION CLOTH, POLYESTER/COTTON, FOR HOSPITAL DUTY UNIFORM (16 MAR 1987) Ident. Num: MIL-C-44270 MIL-C-44270, MILITARY SPECIFICATION CLOTH, POLYESTER/COTTON, FOR HOSPITAL DUTY UNIFORM (16 MAR 1987)., This document covers requirements for three types of polyester/cotton blend cloth. Ident. Num: MIL-C-44273 Rev. Num: - MIL-C-44273, MILITARY SPECIFICATION CLOTH, LAMINATED, WATERPROOF, MOISTURE VAPOR PERMEABLE, AND FLAME RESISTANT (1 JUN 1987)., This document covers a two-layered laminated cloth which is waterproof, moisture vapor permeable, and flame resistant. Ident. Num: MIL-C-44288 MIL-C-44288, MILITARY SPECIFICATION CHICKEN STEW, THERMO STABILIZED, TRAY PACK (20 AUG 1987)., This document covers chicken stew thermo stabilized in tray pack cans for use by the Department of Defense as a component of operational rations. Ident. Num: MIL-C-44289 MIL-C-44289, MILITARY SPECIFICATION CHICKEN A LA KING, THERMOSTABILIZED, TRAY PACK (19 AUG 1987)., This document covers chicken a la king thermostabilized in tray pack cans for use by the Department of Defense as a component of operational rations. Ident. Num: MIL-C-44289 Rev. Num: A MIL-C-44289A, MILITARY SPECIFICATION CHICKEN A LA KING, THERMO STABILIZED, TRAY PACK (14 OCT 1988)., This document covers chicken a la king thermo stabilized in tray pack cans for use by the Department of Defense as a component of operational rations. Ident. Num: MIL-C-44295 Rev. Num: - MIL-C-44295, MILITARY SPECIFICATION CHICKEN BREASTS IN GRAVY, THERMO STABILIZED, TRAY PACK (9 SEPT 1987)., This document covers chicken breasts in gravy thermo stabilized in tray pack cans for use by the Department of Defense as a component of operational rations. Ident. Num: MIL-C-44295 Rev. Num: A MIL-C-44295A, MILITARY SPECIFICATION, CHICKEN BREAST MEAT IN GRAVY, THERMO STABILIZED, TRAY PACK (26 JUNE 1990)., This specification covers chicken breasts in gravy, thermo stabilized in tray pack cans, for use by the Department of Defense as a component of operational rations. Ident. Num: MIL-C-44296 Rev. Num: - MIL-C-44296, MILITARY SPECIFICATION CLOTH, FUSIBLES (26 APR 1988)., This document covers woven, knitted, non woven, and web type fusible cloth. Ident. Num: MIL-C-44296 Rev. Num: A MIL-C-44296A, MILITARY SPECIFICATION CLOTH, FUSIBLE (6 SEPT 1990)., This document covers woven, knitted, non woven, and web type fusible cloth. Ident. Num: MIL-C-44396 Rev. Num: - MIL-C-44396, MILITARY SPECIFICATION CLOTH, TWILL, PARA-ARAMID (6 FEB 1990)., This specification covers one type of para-aramid twill weave cloth. Ident. Num: MIL-C-44436 Rev. Num: - MIL-C-44436 (INTERIM AMENDMENT 1 - NOTICE 1), CLOTH, CAMOUFLAGE PATTERN, WIND RESISTANT POPLIN, NYLON/COTTON BLEND (6 MAY 1999)., MIL-C-44436 Interim Amendment 1, dated 14 September 1995, is hereby canceled without replacement. Ident. Num: MIL-C-44436 Rev. Num: - MIL-C-44436 (INTERIM AMENDMENT 1), CLOTH, CAMOUFLAGE PATTERN, WIND RESISTANT POPLIN, NYLON/COTTON BLEND (14 SEP 1995). Ident. Num: MIL-C-46930 Rev. Num: - MIL-C-46930 (AMENDMENT 1), MILITARY SPECIFICATION CHARGE, PROPELLING, M45 FOR 120MM GUN, M58 LOADING, ASSEMBLING AND PACKING (15 NOV 1963). Ident. Num: MIL-C-46930 Rev. Num: - MIL-C-46930, MILITARY SPECIFICATION CHARGE, PROPELLING, M45 FOR 120MM GUN, M58 LOADING, ASSEMBLING AND PACKING (15 FEB 1963)., This specification covers the M45 propelling charge for use in the 120 MM Gun, M58. Ident. Num: MIL-C-46932 Rev. Num: A MIL-C-46932A (AMENDMENT 3), MILITARY SPECIFICATION, CARTRIDGE, 7.62MM, NATO, BALL, FRANGIBLE, M160 (2 OCT 1984)., This Amendment forms a part of Military Specification MIL-C-46932A (MU) dated 24 August 1966, and is approved for use by the US Army Armament, Munitions and Chemical Command and is available for use by all Departments and Agencies of the Department of Defense. Ident. Num: MIL-C-46932 Rev. Num: A MIL-C-46932A, MILITARY SPECIFICATION, CARTRIDGE, 7.62MM, NATO, BALL, FRANGIBLE, M160 (5 SEP 1962)., This specification covers Cartridge, 7.62mm, NATO, Ball, Frangible, M160 for training purposes. Ident. Num: MIL-C-47044 Rev. Num: - MIL-C-47044, MILITARY SPECIFICATION, COATING, CONFORMAL OF WELDED MODULES, PROCESS REQUIREMENTS FOR (1 MAR 1965)., This specification establishes the requirements for the conformal coating of welded modules. Ident. Num: MIL-C-47044 Rev. Num: - MIL-C-47044, MILITARY SPECIFICATION, COATING, CONFORMAL OF WELDED MODULES, PROCESS REQUIREMENTS FOR (22 JUL 1994). Ident. Num: MIL-C-47175 Rev. Num: A MIL-C-47175A (AMENDMENT 2), MILITARY SPECIFICATION, COMPOUND, POLYURETHANE, FOR CONFORMAL COATING OF ELECTRONIC CIRCUITRY (2 SEP 1999)., This amendent forms a part of MIL-C-471 75A, dated 10 November 1980, and is approved for use by the Aviation and Missile Command (AMCOM), Department of the tiy, and is available for use by all Departments and Agencies of the Department of Defense. MIL-C-47175A remains inactive for new design, and is no longer used, except for replacement purposes, per Notice 2, dated 18 April 1996. Ident. Num: MIL-C-47175 Rev. Num: A MIL-C-47175A (NOTICE 2), MILITARY SPECIFICATION, COMPOUND, POLYURETHANE, FOR CONFORMAL COATING OF ELECTRONIC CIRCUITRY (18 APR 1996)., This notice should be filed in front of MIL-C-47175A (MI), dated 7 June 1974. MIL-C-47175A (MI) is inactive for new design and is no longer used, except for replacement purposes. Ident. Num: MIL-C-47175 Rev. Num: A MIL-C-47175A (NOTICE 3), MILITARY SPECIFICATION, COMPOUND, POLYURETHANE, FOR CONFORMAL COATING OF ELECTRONIC CIRCUITRY (8 JUN 2004)., MIL-C-47175A remains inactive for new design, however, the document is valid for use. Ident. Num: MIL-C-47175 Rev. Num: A MIL-C-47175A, MILITARY SPECIFICATION, COMPOUND, POLYURETHANE, FOR CONFORMAL COATING OF ELECTRONIC CIRCUITRY (10 NOV 1980)., This specification covers polyurethane, solvent-based compounds for use as conformal coatings for printed circuit boards and other electronic circuitry. Ident. Num: MIL-C-48497 Rev. Num: A MIL-C-48497A (AMENDMENT 2), COATING, SINGLE OR MULTILAYER, INTERFERENCE: DURABILITY REQUIREMENTS FOR (30 SEP 1993)., Ident. Num: MIL-C-48497 Rev. Num: A MIL-C-48497A (AMENDMENT 3), COATING, SINGLE OR MULTILAYER, INTERFERENCE: DURABILITY REQUIREMENTS FOR (21 FEB 1995)., Ident. Num: MIL-C-48497 Rev. Num: A MIL-C-48497A, COATING, SINGLE OR MULTILAYER, INTERFERENCE: DURABILITY REQUIREMENTS FOR (8 SEP 1980)., This specification establishes minimum quality and durability requirements for single layer and multilayer interference coatings that are primarily used within the protective confines of sealed optical systems. (See 6.1). Ident. Num: MIL-C-490 Rev. Num: A MIL-C-490A (AMENDMENT 1), CLEANING AND PREPARATION OF FERROUS AND ZINC COATED SURFACES FOR ORGANIC PROTECTIVE COATINGS (11 MAR 1957)., This amendment forms a part of MIL-STD-490A. Ident. Num: MIL-C-490 Rev. Num: A MIL-C-490A (NOTICE 1), CLEANING AND PREPARATION OF FERROUS AND ZINC COATED SURFACES FOR ORGANIC PROTECTIVE COATINGS (8 SEP 1961) (S/S BY TT-C-490)., MIL-C-490A dated 7 May 1954 and Amendment 1 dated 11 march 1957 are hereby cancelled. Further procurement should be made under Federal Specification TT-C-490. Ident. Num: MIL-C-490 Rev. Num: A MIL-C-490A, CLEANING AND PREPARATION OF FERROUS AND ZINC COATED SURFACES FOR ORGANIC PROTECTIVE COATINGS (7 MAY 1954)., This specification covers the cleaning and preparation of iron, steel and zinc coated steal for the application of organic coatings (paint, varnish, lacquer, enamel, etc.). When specified or approved this specification may be used on fabricated items which posses some zinc and aluminum surfaces requiring treatment, in addition to the ferrous surfaces. Ident. Num: MIL-C-5011 Rev. Num: A MIL-C-5011A, MILITARY SPECIFICATION CHART, STANDARD AIRCRAFT CHARACTERISTICS AND PERFORMANCE, PILOTED AIRCRAFT (5 NOV 1951) [S/S BY MIL-STD-3013]., This specification governs the definition of requirements for, and methods of, presenting characteristics and performance data for U.S. military piloted aircraft. Ident. Num: MIL-C-5015 Rev. Num: G MIL-C-5015G (AMENDMENT 4), MILITARY SPECIFICATION CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE, GENERAL SPECIFICATION FOR (9 MAY 1980). Ident. Num: MIL-C-5015 Rev. Num: G MIL-C-5015G (AMENDMENT 5), MILITARY SPECIFICATION CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE, GENERAL SPECIFICATION FOR (15 MAR 1994). Ident. Num: MIL-C-5015 Rev. Num: G MIL-C-5015G, MILITARY SPECIFICATION CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE, GENERAL SPECIFICATION FOR (23 MARCH 1976); This specification covers circular threaded electrical connectors with solder or removable crimp contacts (both front and rear release). These connectors are for use in electronic, electrical power, and control circuits. Ident. Num: MIL-C-5015 Rev. Num: G MIL-C-5015G, MILITARY SPECIFICATION CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE, GENERAL SPECIFICATION FOR (23 MARCH 1976); This supplement forms a part of Military Specification MIL-C-5015G. Ident. Num: MIL-C-5136 Rev. Num: C MIL-C-5136C, MILITARY SPECIFICATION CABLE, POWER, ELECTRICAL POLYCHLOROPRENE SHEATHED, BUNA COMPOUND INSULATED (8 MAR 1968)., This specification covers buna compound insulated single-conductor or multi conductor electrical power cable covered with a polychloroprene sheath. Ident. Num: MIL-C-53004 Rev. Num: B MIL-C-53004B, MILITARY SPECIFICATION, CAMOUFLAGE SCREENING SYSTEMS, MODULAR, LIGHTWEIGHT, SYNTHETIC, WOODLAND, DESERT AND SNOW (24 MAY 1989)., This specification covers woodland, desert and snow camouflage screening systems, synthetic, modular, complete with one hexagon and one rhombus lightweight screen, one repair kit with case, and quick-connect-disconnect devices, all within a transport case. Ident. Num: MIL-C-538 Rev. Num: F MIL-C-538F, MILITARY SPECIFICATION COMPARATOR, COLOR (5 MAY 1975)., This specification covers a comparator for use with color disks conforming to MIL-D-537. Ident. Num: MIL-C-5500 Rev. Num: D MIL-C-5500D, DETAIL SPECIFICATION CAP, HIGH PRESSURE AIR VALVE (5 AUG 1992)., This specification covers one type and grade of high-pressure air valve cap suitable for use in aircraft hydraulic systems. Ident. Num: MIL-C-55302 Rev. Num: E MIL-C-55302E (AMENDMENT 2), DETAIL SPECIFICATION, CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES (30 AUG 1999) [S/S BY MIL-DTL-55302F]. Ident. Num: MIL-C-55302 Rev. Num: E MIL-C-55302E (SUPPLEMENT 1), DETAIL SPECIFICATION, CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES (31 OCT 1988) [S/S BY MIL-DTL-55302F]., This specification covers connectors (plugs and receptacles) for printed circuit subassembly and their accessories, for use with single-sided printed wiring, double-sided printed wiring, and multilayer printed wiring conforming to IPC-D275 and MIL-PRF-31032 , respectively (see 6.1). Contact termination types available (see 3.1) are crimp, dip solder, flex, hand solder, and wire wrappost. Ident. Num: MIL-C-55302 Rev. Num: E MIL-C-55302E, DETAIL SPECIFICATION, CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES (9 APR 1986) [S/S BY MIL-DTL-55302F]., This specification covers connectors (plugs and receptacles) for printed circuit subassembly and their accessories, for use with single-sided printed wiring, double-sided printed wiring, and multilayer printed wiring conforming to MIL-STD-275 and MIL-P-55110, respectively (see 6.1). Contact termination types available (see 3.1) are crimp, dip solder, flex, hand solder, and wire wrappost. Ident. Num: MIL-C-5541 Rev. Num: E MIL-C-5541E, MILITARY SPECIFICATION CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS (30 NOV 1990) [S/S BY MIL-DTL-5541E]., This specification covers the requirements for two classes of chemical conversion coatings formed by the reaction of chemical conversion materials and the surfaces of aluminum and aluminum alloys. This specification is intended specifically to provide components of military weapon systems with maximum corrosion resistance. The coatings also provides a surface having better paint adhesion than uncoated aluminum. It is not intended as a general purpose coating for commercial and decorative appliacations. Ident. Num: MIL-C-5545 Rev. Num: C MIL-C-5545C, MILITARY SPECIFICATION CORROSION PREVENTIVE, AIRCRAFT ENGINE, HEAVY OIL TYPE (14 JUL 1983)., This specification establishes the requirements for the heavy oil type reciprocating aircraft engine corrosion preventive. Ident. Num: MIL-C-5584 Rev. Num: D MIL-C-5584D, MILITARY SPECIFICATION CONTAINER, SHIPPING AND STORAGE, METAL REUSABLE (21 APR 1988)., This specification establishes the requirements for a reusable metal shipping and storage container. The equipment herein referred to as the container, shall be a controlled breathing container for worldwide shipment, storage and handling. The containers shall provide both natural and induced environmental (water-vapor-proof and physical) protection for the prime item defined in 6.2 and its associated hardware Ident. Num: MIL-C-5584 Rev. Num: D MIL-C-5584D, MILITARY SPECIFICATION CONTAINER, SHIPPING AND STORAGE, METAL REUSABLE (21 APR 1988)., This specification establishes the requirements for a reusable metal shipping and storage container. The equipment herein referred to as the container, shall be a controlled breathing container for worldwide shipment, storage and handling. The containers shall provide both natural and induced environmental (water-vapor-proof and physical) protection for the prime item defined in 6.2 and its associated hardware. Ident. Num: MIL-C-5651 Rev. Num: D MIL-C-5651D, CORD, ELASTIC, EXERCISER AND SHOCK ABSORBER, FOR AERONAUTICAL USE (25 SEP 1985)., This specification covers the requirements for three types of elastic shock absorbing and exerciser cord for aeronautical use. Ident. Num: MIL-C-5756 Rev. Num: B MIL-C-5756B, MILITARY SPECIFICATION CABLE AND WIRE, POWER, ELECTRIC, PORTABLE (8 OCT 1954)., This specification covers 600 volt heavy-duty, single-conductor wire and multi-conductor electric cable for severe flexing service, having an outer jacket or cover of synthetic or natural-rubber compounds. Ident. Num: MIL-C-5756 Rev. Num: C MIL-C-5756C, MILITARY SPECIFICATION CABLE, POWER, ELECTRICAL, PORTABLE GENERAL SPECIFICATION (5 APR 1990)., This specification covers 600 volt heavy duty, portable, power, single and multi conductor, electrical cable for severe flexing service. Ident. Num: MIL-C-5778 Rev. Num: D MIL-C-5778D (NOTICE 1), MILITARY SPECIFICATION, COVERS, AIRCRAFT COMPONENTS, GENERAL REQUIREMENTS FOR (17 SEP 1997) [S/S BY SAE-AS5778]., MIL-C-5778D, dated 08 May 1992, is hereby canceled. Future acquisition of these covers should refer to SAE-AS5778, of the same title and issued August 1997. Ident. Num: MIL-C-5778 Rev. Num: D MIL-C-5778D, MILITARY SPECIFICATION, COVERS, AIRCRAFT COMPONENTS, GENERAL REQUIREMENTS FOR (8 MAY 1992) [S/S BY SAE-AS5778]., This specification covers general requirements for covers intended to protect the following aircraft parts: Cockpit, Fuselage, Canopy, Engine, Armament, Propeller or Rotor, Miscellaneous. Ident. Num: MIL-C-601 Rev. Num: G MIL-C-601G (AMENDMENT 1), MILITARY SPECIFICATION CYLINDER, CARBON DIOXIDE FILLED, TECHNICAL (31 AUG 1972) [S/S BY SAE-AS6011]., Ident. Num: MIL-C-601 Rev. Num: G MIL-C-601G (NOTICE 1), MILITARY SPECIFICATION CYLINDER, CARBON DIOXIDE FILLED, TECHNICAL (7 SEP 1999) [S/S BY SAE-AS6011]., MIL-C-601G(1), dated 31 August 1972, is hereby canceled. Future acquisition should refer to SAE-AS6011, “Cylinders, Carbon Dioxide Filled, Technical.” (Application for copies of SAE Aerospace Standards should be addressed to SAE, 400 Commonwealth Drive, Warrendale, PA 15096-0001). Ident. Num: MIL-C-601 Rev. Num: G MIL-C-601G, MILITARY SPECIFICATION CYLINDER, CARBON DIOXIDE FILLED, TECHNICAL (30 JUN 1971) [S/S BY SAE-AS6011]., ., This specification covers the requirements for the procurement of three types of puncturable-seal carbon dioxide filled cylinders. Ident. Num: MIL-C-6136 Rev. Num: A MIL-C-6136A (AMENDMENT 2), MILITARY SPECIFICATION, CONDUIT: ELECTRICAL, FLEXIBLE, SHIELDED, ALUMINUM ALLOY FOR AIRCRAFT INSTALLATIONS (30 JUN 1970) [S/S BY SAE-AS6136]. Ident. Num: MIL-C-6136 Rev. Num: A MIL-C-6136A, MILITARY SPECIFICATION, CONDUIT: ELECTRICAL, FLEXIBLE, SHIELDED, ALUMINUM ALLOY FOR AIRCRAFT INSTALLATIONS (10 DEC 1965) [S/S BY SAE-AS6136]., This specification covers the requirements for shielded electrical conduit for aircraft installations. Ident. Num: MIL-C-6166 Rev. Num: C MIL-C-6166C (AMENDMENT 2), MILITARY SPECIFICATION CORD: HEADSET-MICROPHONE, CX1301/AR (16 DEC 1968)., Ident. Num: MIL-C-6166 Rev. Num: C MIL-C-6166C, MILITARY SPECIFICATION CORD: HEADSET-MICROPHONE, CX-1301/AR (25 SEPT 1961)., This specification covers cord designed to provide electrical connections between a boom-or mask-type microphone and headphones, and the airplane intercommunication and radio facilities. Ident. Num: MIL-C-6183 Rev. Num: B MIL-C-6183B, MILITARY SPECIFICATION, CORK AND RUBBER COMPOSITION SHEET, FOR AROMATIC FUEL AND OIL RESISTANT GASKETS (13 FEB 1981) [S/S BY SAE-AMS-C-6183]., This specification covers vulcanized sheet made of granulated cork uniformly dispersed in a synthetic rubber compound, for use in gaskets where aromatic fuel or oil resistance is required. Ident. Num: MIL-C-63959 Rev. Num: - MIL-C-63959, MILITARY SPECIFICATION, CONCERTINA SUBASSEMBLY FOR WADS (8 JUL 1991)., This specification covers one type of electronics assembly designated Concertina Subassembly. The concertina subassembly is component of the concertina blanket used in weapons storage bunkers as part of the WADS program. Ident. Num: MIL-C-64025 Rev. Num: - MIL-C-64025 (AR), MILITARY SPECIFICATION CONTROL REMOTE M71 LAND MINE SYSTEM (20 OCT 1986)., This specification establishes the Quality Assurance provisions for the manufacture, inspection, test and packaging of the Remote Control Unit (Rcu). Ident. Num: MIL-C-6529C Rev. Num: C MIL-C-6529C (AMENDMENT 2), MILITARY SPECIFICATION CORROSION PREVENTIVE, AIRCRAFT ENGINE (29 SEPT 1959)., Ident. Num: MIL-C-6529 Rev. Num: C MIL-C-6529C, MILITARY SPECIFICATION CORROSION PREVENTATIVE, AIRCRAFT ENGINE (21 AUG 1958)., This specification covers an oil-type corrosion preventive which shall be a satisfactory lubricant for aircraft engines when applied as specified. Ident. Num: MIL-C-6529 Rev. Num: C MIL-C-6529C, MILITARY SPECIFICATION CORROSION PREVENTIVE, AIRCRAFT ENGINE (21 AUG 1958)., This specification covers an oil type corrosion preventive which shall be a satisfactory lubricant for aircraft engines when applied as specified. Ident. Num: MIL-C-675 Rev. Num: C MIL-C-675C (AMENDMENT 1), MILITARY SPECIFICATION COATING OF GLASS OPTICAL ELEMENTS (ANTI-REFLECTION) (20 AUG 1986). This amendment forms a part of Military Specification MIL-C-675C, dated 22 August 1980, and is approved for use by all Departments and Agencies of the Department of Defense. MIL-C-675C, MILITARY SPECIFICATION COATING OF GLASS OPTICAL ELEMENTS (ANTI-REFLECTION) (22 AUG 1980) Ident. Num: MIL-C-675 Rev. Num: C MIL-C-675C, MILITARY SPECIFICATION COATING OF GLASS OPTICAL ELEMENTS (ANTI-REFLECTION) (22 AUG 1980)., This specification establishes the minimum optical and durability requirements for magnesium fluoride interference films used as anti-reflection coatings on optical materials. Ident. Num: MIL-C-6781 Rev. Num: B MIL-C-6781B (AMENDMENT 2), MILITARY SPECIFICATION, CONTROL PANEL: AIRCRAFT EQUIPMENT, RACK OR CONSOLE MOUNTED (15 DEC 1999)., This amendment forms a part of MIL-C-6781B, dated 13 September 1960, and is approved for use by all Departments and Agencies of the Department of Defense. Ident. Num: MIL-C-6781 Rev. Num: B MIL-C-6781B, MILITARY SPECIFICATION, CONTROL PANEL: AIRCRAFT EQUIPMENT, RACK OR CONSOLE MOUNTED (13 SEP 1960)., This specification covers general requirements for the design and construction of two types of control panels for use with airborne equipment, and is intended primarily for mounting on a rack or control console in the pilot's cockpit. Ident. Num: MIL-C-70599 Rev. Num: - MIL-C-70599 (AR) AMENDMENT 1, MILITARY SPECIFICATION CARBINE, 5.56MM: M4 (27 NOV 1992)., This Amendment forms a part of Military Specification MIL-C- 70599(AR), dated 1 April 1987, and is approved for use by U.S. Army Armament, Munitions and Chemical Command and is available for use by all Departments and Agencies of the Department of Defense. Ident. Num: MIL-C-70599 Rev. Num: - MIL-C-70599 (AR), MILITARY SPECIFICATION CARBINE, 5.56MM: M4 (1 APR 1987)., This specification covers the requirements, examinations and tests for a 5.56mm lightweight, air-cooled, gas operated, magazine-fed carbine designed for either three shot automatic burst or semi-automatic fire (see 6.1). Ident. Num: MIL-C-70599 Rev. Num: A MIL-C-70599A (AR) AMENDMENT 1, MILITARY SPECIFICATION CARBINE, 5.56MM: M4 (14 SEP 1994)., This Amendment forms a part of MIL-R-70599A(AR), dated 20 January 1994, and is approved for use by U.S. Army Armament, Munitions and Chemical Command and is available for use by all Departments and Agencies of the Department of Defense. Ident. Num: MIL-C-70599 Rev. Num: A MIL-C-70599A (AR) NOTICE 1, MILITARY SPECIFICATION CARBINE, 5.56MM: M4 (27 FEB 1997)., This notice should be filed in front of MIL-C-70599A(AR) dated 20 January 1994 MIL-C-70599A(AR) dated 20 January 1994 with Amendment 1, dated 14 September 1994 is inactive for new design and no longer used except for replacement purposes. Ident. Num: MIL-C-70599 Rev. Num: A MIL-C-70599A (AR), MILITARY SPECIFICATION CARBINE, 5.56MM: M4 (20 JAN 1994)., This specification covers the requirements, examinations and tests for a 5.56mm lightweight, air-cooled, gas operated, magazine-fed carbine designed for either three shot automatic burst or semi-automatic fire (see 6.1). Ident. Num: MIL-C-70725 Rev. Num: A MIL-C-70725A, MILITARY SPECIFICATION, CARTRIDGE, 5.56MM, M862 SHORT RANGE TRAINING AMMUNITION PERFORMANCE SPECIFICATION FOR(8 DEC 1993)., This specification covers quality assurance provisions and preparation for delivery for Cartridge, 5.56mm Short Range Training Ammunition (SRTA) (see 6.1). Ident. Num: MIL-C-7078 MIL-C-7078/27, MILITARY SPECIFICATION SHEET CABLE, ELECTRIC, AEROSPACE VEHICLE, MIL-W-81381/8 BASIC WIRES, UNSHIELDED, UNJACKETED 600-VOLT, 200C (6 APR 1972)., The complete requirements for procuring the cable described herein shall consist of this document and the issues in effect of Specification MIL-C-7078 and Specification Sheet MIL-W-81381/8. Ident. Num: MIL-C-7078 MIL-C-7078/9, MILITARY SPECIFICATION SHEET CABLE, ELECTRIC, AEROSPACE VEHICLE, MIL-W-81381/12 BASIC WIRES, COPPER SHIELD, POLYIMIDE TAPE JACKET, 600 VOLT, 150C (5 AUG 1970)., The complete requirements for procuring the cable described herein shall consist of this document and the issues in effect of Specification MIL-C-7078 and Specification Sheet MIL-W-81381/12. Ident. Num: MIL-C-7078-1 MIL-C-70781 (AMENDMENT 6), MILITARY SPECIFICATION CARTRIDGE, 60MM, SMOKE, MARKING, M722 LOADING, ASSEMBLING AND PACKING (1 OCT 1998)., Ident. Num: MIL-C-70781 MIL-C-70781, MILITARY SPECIFICATION CARTRIDGE, 60MM: SMOKE, MARKING, M722 ASSEMBLING, MARKING AND PACKING (17 OCT 1988)., This specification covers requirements and qualiy assurance provisions for the assembling, marking, and packing for one type of WP cartridge, M7222. Ident. Num: MIL-C-7078 Rev. Num: C MIL-C-7078C (INTERIM AMENDMENT 1), MILITARY SPECIFICATION CABLE, ELECTRIC, AEROSPACE VEHICLE, GENERAL SPECIFICATION (23 SEPT 1976). Ident. Num: MIL-C-71186 Rev. Num: - MIL-C-71186 (AR) AMENDMENT 1, MILITARY SPECIFICATION CARBINE, 5.56MM: M4A1 (14 SEPT 1994)., This amendment forms a part of MIL-R-71186 (AR), dated 31 January 1994, and is approved for use by the U.S. Army Armament, Munitions, and Chemical Command and is available for use by all Departments and Agencies of the Department of Defense. Ident. Num: MIL-C-71186 Rev. Num: - MIL-C-71186 (AR) AMENDMENT 1, MILITARY SPECIFICATION CARBINE, 5.56MM: M4A1 (18 AUG 1997)., This notice should be filed in front of MIL-C-71186(AR) dated 31 January 1994 MIL-C-71186(AR) dated 31 January 1994 with Amendment 1, dated 14 September 1994 is inactive for new design and no longer used except for replacement purposes. Ident. Num: MIL-C-71186 Rev. Num: - MIL-C-71186 (AR), MILITARY SPECIFICATION CARBINE, 5.56MM: M4A1 (31 JAN 1994)., This specification covers the requirements, examinations and tests for a 5.56mm lightweight, air-cooled, gas operated, magazine-fed carbine designed for either full automatic or semi-automatic fire. Ident. Num: MIL-C-7350 Rev. Num: G MIL-C-7350G, MILITARY SPECIFICATION, CLOTH, PARACHUTE, NYLON (17 APR 1992)., This specification covers nylon cloth for fabrication of parachute. MIL-C-7438G (AMENDMENT 1), MILITARY SPECIFICATION CORE MATERIAL, ALUMINUM, FOR SANDWICH CONSTRUCTION Ident. Num: MIL-C-7438 Rev. Num: G MIL-C-7438G (AMENDMENT 1), MILITARY SPECIFICATION CORE MATERIAL, ALUMINUM, FOR SANDWICH CONSTRUCTION. This amendment forms a part of MIL-C-7438G, dated 19 June 1985, and is approved for use by all Departments and Agencies of the Department of Defense. Ident. Num: MIL-C-7438 Rev. Num: G MIL-C-7438G, MILITARY SPECIFICATION CORE MATERIAL, ALUMINUM, FOR SANDWICH CONSTRUCTION. This specification covers treated aluminum core material for structural sandwich construction. Ident. Num: MIL-C-743 Rev. Num: A MIL-C-743A (NOTICE 1), MILITARY SPECIFICATION CARTRIDGE, CALIBER .30, CARBINE, TEST, HIGH PRESSURE, M18 (21 MAY 1987)., MIL-C-743A (AR), dated 7 October 1968, has been reviewed and determined to be valid for use in acquisition. Ident. Num: MIL-C-743 Rev. Num: A MIL-C-743A (NOTICE 2), MILITARY SPECIFICATION CARTRIDGE, CALIBER .30, CARBINE, TEST, HIGH PRESSURE, M18 (18 APR 1997)., MIL-C-743A, including Notice 1, dated 21 May 1987, is hereby canceled without replacement. Ident. Num: MIL-C-743 Rev. Num: A MIL-C-743A, MILITARY SPECIFICATION CARTRIDGE, CALIBER .30, CARBINE, TEST, HIGH PRESSURE, M18 (7 OCT 1968)., This specification covers Cartridge, Caliber, .30, Carbine, Test, High Pressure, M18 for proof testing caliber .30 carbine weapons. Ident. Num: MIL-C-7460 Rev. Num: A MIL-C-7460A, MILITARY SPECIFICATION, CHROMIUM PLATING, POROUS CHANNEL TYPE, AIRCRAFT ENGINE CYLINDERS, GENERAL SPECIFICATIONS FOR (4 FEB 1971)., This specification covers the requirements for porous (channel type) chromium plating the cylinder bore of aircraft engine cylinders. Ident. Num: MIL-C-7712 Rev. Num: A MIL-C-7712A, MILITARY SPECIFICATION, COMPRESSOR, AIR, GAS TURBINE TYPE GENERAL SPECIFICATION FOR (13 NOV 1952)., This specification covers the general requirements for gas turbine air compressors. Ident. Num: MIL-C-7762 Rev. Num: - MIL-C-7762 (AMENDMENT 1), MILITARY SPECIFICATION, COMPASSES, INSTALLATION OF (22 AUG 1989)., This amendment forms a part of MIL-C-7762A, dated 18 January 1967, and is approved for use by all Department and Agencies of the Department of Defense. Ident. Num: MIL-C-7762 Rev. Num: - MIL-C-7762 (NOTICE 1), MILITARY SPECIFICATION, COMPASSES, INSTALLATION OF (21 DEC 1990). Ident. Num: MIL-C-7762 Rev. Num: A MIL-C-7762, MILITARY SPECIFICATION, COMPASSES, INSTALLATION OF (18 JAN 1967)., This specification establishes the general requirements for the installation of compasses in all types of aircraft. Ident. Num: MIL-C-8073 Rev. Num: D MIL-C-8073D, MILITARY SPECIFICATION, CORE MATERIAL, PLASTIC HONEYCOMB, LAMINATED GLASS FABRIC BASE, FOR AIRCRAFT STRUCTURAL AND ELECTRONIC APPLICATIONS (16 AUG 1973) [S/S BY SAE-AMS-C-8073]., This specification, covers the requirements for glass fabric base plastic honeycomb core materials for aircraft structural applications, including aircraft exterior parts, such as radio and radar antenna housings, and other parts. Ident. Num: MIL–C–81302 Rev. Num: D MIL-C-81302D (NOTICE 1), MILITARY SPECIFICATION, CLEANING, COMPOUND, SOLVENT, TRICHLOROTRIFLUOROETHANE (28 OCT 1991)., MIL-C–81302D (l), dated 28 September 1987, has been reviewed and determined to be valid for use in acquisition. Ident. Num: MIL-C-81740 Rev. Num: - MIL-C-81740, MILITARY SPECIFICATION, COATINGS, ALUMINUM AND ALUMINUM ALLOYS (METALLIC COMPOUND DECOMPOSITION) (15 AUG 1969)., This specifications covers the requirements for aluminum and aluminum alloy coatings deposited by decomposition of metallic compounds on ferrous and non-ferrous metals. MIL-C-81774A (AMENDMENT 1), MILITARY SPECIFICATION, CONTROL PANEL, AIRCRAFT, GENERAL REQUIREMENTS FOR (11 DEC 1976)., This amendment forms a part of Military Specification
MIL-C-81774A, dated 23 March 1973, and is mandatory
for use by all Departments and Agencies of the Department
of Defense. MIL-C-81774A, MILITARY SPECIFICATION, CONTROL PANEL, AIRCRAFT, GENERAL REQUIREMENTS FOR (1 JUL 1970) Ident. Num: MIL-C-81774 Rev. Num: A MIL-C-81774A, MILITARY SPECIFICATION, CONTROL PANEL, AIRCRAFT, GENERAL REQUIREMENTS FOR (1 JUL 1970)., This specification covers the general requirements for control panels for aircrew stations in military aircraft. The term "aircraft control panel" as used herein includes the backing plate, the lighted panel, fasteners, markings, finish, nomenclature, controls, control guards, and displays Ident. Num: MIL-C-81814 Rev. Num: B MIL-C-81814B (AMENDMENT 1), MILITARY SPECIFICATION CLOTH, TWILL, ARAMID, HIGH TEMPERATURE RESISTANT (16 NOV 1984). MIL-C-81814B, MILITARY SPECIFICATION, CLOTH, TWILL, ARAMID, HIGH TEMPERATURE RESISTANT (10 APR 1978) Ident. Num: MIL-C-81814 Rev. Num: B MIL-C-81814B, MILITARY SPECIFICATION, CLOTH, TWILL, ARAMID, HIGH TEMPERATURE RESISTANT (10 APR 1978)., This specification covers high temperature resistant aramid twill cloth used in the manufacture of aeronautical clothing. Ident. Num: MIL-C-81814 Rev. Num: C MIL-C-81814C (AMENDMENT 1), MILITARY SPECIFICATION CLOTH, TWILL, ARAMID, HIGH TEMPERATURE RESISTANT (29 AUG 2003)., This amendment forms a part of MIL-C-81814C, dated 17 August 1990, and is approved for use by all Departments and Agencies of the Department of Defense. MIL-C-81814C, MILITARY SPECIFICATION, CLOTH, TWILL, ARAMID, HIGH TEMPERATURE RESISTANT (17 AUG 1990) Ident. Num: MIL-C-81814 Rev. Num: C MIL-C-81814C, MILITARY SPECIFICATION, CLOTH, TWILL, ARAMID, HIGH TEMPERATURE RESISTANT (17 AUG 1990)., This specification covers high temperature resistant aramid twill cloth used in the manufacture of aeronautical clothing. Ident. Num: MIL-C-81964 Rev. Num: A MIL-C-81964A, MILITARY SPECIFICATION, CLEANING COMPOUND, AVIONICS COMPONENTS (28 NOV 1977) [S/S BY MIL-PRF-29608]., This specification covers a cleaning compound designed for use on avionic components. Ident. Num: MIL-C-81986 Rev. Num: - MIL-C-81986 (AMENDMENT 1), MILITARY SPECIFICATION, CORE MATERIAL, PLASTIC HONEYCOMB, NYLON PAPER BASE; FOR AIRCRAFT STRUCTURAL APPLICATIONS (15 DEC 1975) [S/S BY SAE-AMS-C-81986]. Ident. Num: MIL-C-81986 Rev. Num: - MIL-C-81986, MILITARY SPECIFICATION, CORE MATERIAL, PLASTIC HONEYCOMB, NYLON PAPER BASE; FOR AIRCRAFT STRUCTURAL APPLICATIONS (19 NOV 1974) [S/S BY SAE-AMS-C-81986]., This specification covers the requirements for non-perforated nylon paper base plastic honeycomb core material for aircraft structural applications, including exterior parts such as radio and radar antenna housings. Ident. Num: MIL-C-82001 Rev. Num: E MIL-C-82001E (NOTICE 1), MILITARY SPECIFICATION, CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAL, INTERVEHICULAR (24 VOLT TO 12 VOLT REDUCTION) (27 APR 2000)., MIL-C-82001E, dated 07 February 1992, is inactive for new design and is no longer used, except for replacement purposes. |
